578 lines
14 KiB
C
Executable File
578 lines
14 KiB
C
Executable File
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/err.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/rfkill.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sunxi-gpio.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/crypto.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/capability.h>
|
|
|
|
#include "sunxi-rfkill.h"
|
|
|
|
static struct sunxi_wlan_platdata *wlan_data;
|
|
|
|
static int sunxi_wlan_on(struct sunxi_wlan_platdata *data, bool on_off);
|
|
static DEFINE_MUTEX(sunxi_wlan_mutex);
|
|
|
|
void sunxi_wl_chipen_set(int dev, int on_off)
|
|
{
|
|
/* Only wifi and bt both close, chip_en goes down,
|
|
* otherwise, set chip_en up to keep module work.
|
|
* dev : device to set power status. 0: wifi, 1: bt
|
|
* on_off: power status to set. 0: off, 1: on
|
|
*/
|
|
static int power_state;
|
|
|
|
if (dev == 0) { /* 0 for wifi */
|
|
power_state &= ~(0x1);
|
|
power_state |= (on_off > 0);
|
|
} else if (dev == 1) { /* 1 for bt */
|
|
power_state &= ~(1<<1);
|
|
power_state |= ((on_off > 0) << 1);
|
|
}
|
|
|
|
if (gpio_is_valid(wlan_data->gpio_chip_en)) {
|
|
if (!wlan_data->gpio_chip_en_invert)
|
|
gpio_set_value(wlan_data->gpio_chip_en, (power_state != 0));
|
|
else
|
|
gpio_set_value(wlan_data->gpio_chip_en, (power_state == 0));
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(sunxi_wl_chipen_set);
|
|
|
|
void sunxi_wlan_set_power(bool on_off)
|
|
{
|
|
struct platform_device *pdev;
|
|
int ret = 0;
|
|
|
|
if (!wlan_data)
|
|
return;
|
|
|
|
pdev = wlan_data->pdev;
|
|
mutex_lock(&sunxi_wlan_mutex);
|
|
if (on_off != wlan_data->power_state) {
|
|
ret = sunxi_wlan_on(wlan_data, on_off);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "set power failed\n");
|
|
}
|
|
|
|
sunxi_wl_chipen_set(0, on_off);
|
|
|
|
mutex_unlock(&sunxi_wlan_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(sunxi_wlan_set_power);
|
|
|
|
int sunxi_wlan_get_bus_index(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
if (!wlan_data)
|
|
return -EINVAL;
|
|
|
|
pdev = wlan_data->pdev;
|
|
dev_info(&pdev->dev, "bus_index: %d\n", wlan_data->bus_index);
|
|
return wlan_data->bus_index;
|
|
}
|
|
EXPORT_SYMBOL_GPL(sunxi_wlan_get_bus_index);
|
|
|
|
int sunxi_wlan_get_oob_irq(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
int host_oob_irq = 0;
|
|
|
|
if (!wlan_data || !gpio_is_valid(wlan_data->gpio_wlan_hostwake))
|
|
return 0;
|
|
|
|
pdev = wlan_data->pdev;
|
|
|
|
host_oob_irq = gpio_to_irq(wlan_data->gpio_wlan_hostwake);
|
|
if (IS_ERR_VALUE(host_oob_irq))
|
|
dev_err(&pdev->dev, "map gpio [%d] to virq failed, errno = %d\n",
|
|
wlan_data->gpio_wlan_hostwake, host_oob_irq);
|
|
|
|
return host_oob_irq;
|
|
}
|
|
EXPORT_SYMBOL_GPL(sunxi_wlan_get_oob_irq);
|
|
|
|
int sunxi_wlan_get_oob_irq_flags(void)
|
|
{
|
|
int oob_irq_flags;
|
|
|
|
if (!wlan_data)
|
|
return 0;
|
|
|
|
oob_irq_flags = (IRQF_TRIGGER_HIGH | IRQF_SHARED | IRQF_NO_SUSPEND);
|
|
|
|
return oob_irq_flags;
|
|
}
|
|
EXPORT_SYMBOL_GPL(sunxi_wlan_get_oob_irq_flags);
|
|
|
|
static int sunxi_wlan_on(struct sunxi_wlan_platdata *data, bool on_off)
|
|
{
|
|
struct platform_device *pdev = data->pdev;
|
|
struct device *dev = &pdev->dev;
|
|
int ret = 0;
|
|
|
|
if (!on_off && gpio_is_valid(data->gpio_wlan_regon))
|
|
gpio_set_value(data->gpio_wlan_regon, 0);
|
|
|
|
if (data->wlan_power_name) {
|
|
data->wlan_power = regulator_get(dev, data->wlan_power_name);
|
|
if (!IS_ERR(data->wlan_power)) {
|
|
if (on_off) {
|
|
ret = regulator_enable(data->wlan_power);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator wlan_power enable failed\n");
|
|
regulator_put(data->wlan_power);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_get_voltage(data->wlan_power);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator wlan_power get voltage failed\n");
|
|
regulator_put(data->wlan_power);
|
|
return ret;
|
|
}
|
|
dev_info(dev, "check wlan wlan_power voltage: %d\n",
|
|
ret);
|
|
} else {
|
|
ret = regulator_disable(data->wlan_power);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator wlan_power disable failed\n");
|
|
regulator_put(data->wlan_power);
|
|
return ret;
|
|
}
|
|
}
|
|
regulator_put(data->wlan_power);
|
|
}
|
|
}
|
|
|
|
if (data->io_regulator_name) {
|
|
data->io_regulator = regulator_get(dev,
|
|
data->io_regulator_name);
|
|
if (!IS_ERR(data->io_regulator)) {
|
|
if (on_off) {
|
|
ret = regulator_enable(data->io_regulator);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator io_regulator enable failed\n");
|
|
regulator_put(data->io_regulator);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_get_voltage(data->io_regulator);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator io_regulator get voltage failed\n");
|
|
regulator_put(data->io_regulator);
|
|
return ret;
|
|
}
|
|
dev_info(dev, "check wlan io_regulator voltage: %d\n",
|
|
ret);
|
|
} else {
|
|
ret = regulator_disable(data->io_regulator);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator io_regulator disable failed\n");
|
|
regulator_put(data->io_regulator);
|
|
return ret;
|
|
}
|
|
}
|
|
regulator_put(data->io_regulator);
|
|
}
|
|
}
|
|
|
|
if (on_off && gpio_is_valid(data->gpio_wlan_regon)) {
|
|
mdelay(10);
|
|
gpio_set_value(data->gpio_wlan_regon, 1);
|
|
}
|
|
wlan_data->power_state = on_off;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t power_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%d\n", wlan_data->power_state);
|
|
}
|
|
|
|
static ssize_t power_state_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
unsigned long state;
|
|
int err;
|
|
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
err = kstrtoul(buf, 0, &state);
|
|
if (err)
|
|
return err;
|
|
|
|
if (state > 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&sunxi_wlan_mutex);
|
|
if (state != wlan_data->power_state) {
|
|
err = sunxi_wlan_on(wlan_data, state);
|
|
if (err)
|
|
dev_err(dev, "set power failed\n");
|
|
}
|
|
mutex_unlock(&sunxi_wlan_mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
|
|
power_state_show, power_state_store);
|
|
|
|
static ssize_t scan_device_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
unsigned long state;
|
|
int err;
|
|
int bus = wlan_data->bus_index;
|
|
|
|
err = kstrtoul(buf, 0, &state);
|
|
if (err)
|
|
return err;
|
|
|
|
sunxi_wl_chipen_set(0, state);
|
|
|
|
dev_info(dev, "start scan device on bus_index: %d\n",
|
|
wlan_data->bus_index);
|
|
if (bus < 0) {
|
|
dev_err(dev, "scan device fail!\n");
|
|
return -1;
|
|
}
|
|
sunxi_mmc_rescan_card(bus);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(scan_device, S_IRUGO | S_IWUSR,
|
|
NULL, scan_device_store);
|
|
|
|
static struct attribute *misc_attributes[] = {
|
|
&dev_attr_power_state.attr,
|
|
&dev_attr_scan_device.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group misc_attribute_group = {
|
|
.name = "rf-ctrl",
|
|
.attrs = misc_attributes,
|
|
};
|
|
|
|
static struct miscdevice sunxi_wlan_dev = {
|
|
.minor = MISC_DYNAMIC_MINOR,
|
|
.name = "sunxi-wlan",
|
|
};
|
|
|
|
static char wifi_mac_str[18] = {0};
|
|
|
|
void sunxi_wlan_chipid_mac_address(u8 *mac)
|
|
{
|
|
#define MD5_SIZE 16
|
|
#define CHIP_SIZE 16
|
|
|
|
struct crypto_hash *tfm;
|
|
struct hash_desc desc;
|
|
struct scatterlist sg;
|
|
u8 result[MD5_SIZE];
|
|
u8 chipid[CHIP_SIZE];
|
|
int i = 0;
|
|
int ret = -1;
|
|
|
|
memset(chipid, 0, sizeof(chipid));
|
|
memset(result, 0, sizeof(result));
|
|
|
|
sunxi_get_soc_chipid((u8 *)chipid);
|
|
|
|
tfm = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC);
|
|
if (IS_ERR(tfm)) {
|
|
pr_err("Failed to alloc md5\n");
|
|
return;
|
|
}
|
|
desc.tfm = tfm;
|
|
desc.flags = 0;
|
|
|
|
ret = crypto_hash_init(&desc);
|
|
if (ret < 0) {
|
|
pr_err("crypto_hash_init() failed\n");
|
|
goto out;
|
|
}
|
|
|
|
sg_init_one(&sg, chipid, sizeof(chipid) - 1);
|
|
ret = crypto_hash_update(&desc, &sg, sizeof(chipid) - 1);
|
|
if (ret < 0) {
|
|
pr_err("crypto_hash_update() failed for id\n");
|
|
goto out;
|
|
}
|
|
|
|
crypto_hash_final(&desc, result);
|
|
if (ret < 0) {
|
|
pr_err("crypto_hash_final() failed for result\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Choose md5 result's [0][2][4][6][8][10] byte as mac address */
|
|
for (i = 0; i < 6; i++)
|
|
mac[i] = result[2*i];
|
|
mac[0] &= 0xfe; /* clear multicast bit */
|
|
mac[0] &= 0xfd; /* clear local assignment bit (IEEE802) */
|
|
|
|
out:
|
|
crypto_free_hash(tfm);
|
|
}
|
|
EXPORT_SYMBOL(sunxi_wlan_chipid_mac_address);
|
|
|
|
void sunxi_wlan_custom_mac_address(u8 *mac)
|
|
{
|
|
int i;
|
|
char *p = wifi_mac_str;
|
|
u8 mac_addr[ETH_ALEN] = {0};
|
|
|
|
if (0 == strlen(p))
|
|
return;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++, p++)
|
|
mac_addr[i] = simple_strtoul(p, &p, 16);
|
|
|
|
memcpy(mac, mac_addr, sizeof(mac_addr));
|
|
}
|
|
EXPORT_SYMBOL(sunxi_wlan_custom_mac_address);
|
|
|
|
#ifndef MODULE
|
|
static int __init set_wlan_mac_addr(char *str)
|
|
{
|
|
char *p = str;
|
|
|
|
if (str != NULL && *str)
|
|
strlcpy(wifi_mac_str, p, 18);
|
|
|
|
return 0;
|
|
}
|
|
__setup("wifi_mac=", set_wlan_mac_addr);
|
|
#endif
|
|
|
|
static int sunxi_wlan_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct sunxi_wlan_platdata *data;
|
|
struct gpio_config config;
|
|
u32 val;
|
|
const char *power, *io_regulator;
|
|
int ret = 0;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
data->pdev = pdev;
|
|
wlan_data = data;
|
|
|
|
data->bus_index = -1;
|
|
if (!of_property_read_u32(np, "wlan_busnum", &val)) {
|
|
switch (val) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
data->bus_index = val;
|
|
break;
|
|
default:
|
|
dev_err(dev, "unsupported wlan_busnum (%u)\n", val);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
dev_info(dev, "wlan_busnum (%u)\n", val);
|
|
|
|
if (of_property_read_string(np, "wlan_power", &power)) {
|
|
dev_warn(dev, "Missing wlan_power.\n");
|
|
} else {
|
|
data->wlan_power_name = devm_kzalloc(dev, 64, GFP_KERNEL);
|
|
if (!data->wlan_power_name)
|
|
return -ENOMEM;
|
|
strcpy(data->wlan_power_name, power);
|
|
}
|
|
dev_info(dev, "wlan_power_name (%s)\n", data->wlan_power_name);
|
|
|
|
if (of_property_read_string(np, "wlan_io_regulator", &io_regulator)) {
|
|
dev_warn(dev, "Missing wlan_io_regulator.\n");
|
|
} else {
|
|
data->io_regulator_name = devm_kzalloc(dev, 64, GFP_KERNEL);
|
|
if (!data->io_regulator_name)
|
|
return -ENOMEM;
|
|
strcpy(data->io_regulator_name, io_regulator);
|
|
}
|
|
dev_info(dev, "io_regulator_name (%s)\n", data->io_regulator_name);
|
|
|
|
data->gpio_wlan_regon = of_get_named_gpio_flags(np, "wlan_regon",
|
|
0, (enum of_gpio_flags *)&config);
|
|
if (!gpio_is_valid(data->gpio_wlan_regon)) {
|
|
dev_err(dev, "get gpio wlan_regon failed\n");
|
|
} else {
|
|
dev_info(dev, "wlan_regon gpio=%d mul-sel=%d pull=%d drv_level=%d data=%d\n",
|
|
config.gpio,
|
|
config.mul_sel,
|
|
config.pull,
|
|
config.drv_level,
|
|
config.data);
|
|
|
|
ret = devm_gpio_request(dev, data->gpio_wlan_regon,
|
|
"wlan_regon");
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't request wlan_regon gpio %d\n",
|
|
data->gpio_wlan_regon);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_direction_output(data->gpio_wlan_regon, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't request output direction wlan_regon gpio %d\n",
|
|
data->gpio_wlan_regon);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
data->gpio_chip_en = of_get_named_gpio_flags(np, "chip_en",
|
|
0, (enum of_gpio_flags *)&config);
|
|
if (!gpio_is_valid(data->gpio_chip_en)) {
|
|
dev_err(dev, "get gpio chip_en failed\n");
|
|
} else {
|
|
dev_info(dev, "chip_en gpio=%d mul-sel=%d pull=%d drv_level=%d data=%d\n",
|
|
config.gpio,
|
|
config.mul_sel,
|
|
config.pull,
|
|
config.drv_level,
|
|
config.data);
|
|
|
|
ret = devm_gpio_request(dev, data->gpio_chip_en, "chip_en");
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't request chip_en gpio %d\n",
|
|
data->gpio_chip_en);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_direction_output(data->gpio_chip_en, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't request output direction chip_en gpio %d\n",
|
|
data->gpio_chip_en);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "chip_en_invert", &val)) {
|
|
if (val > 0)
|
|
data->gpio_chip_en_invert = 1;
|
|
else
|
|
data->gpio_chip_en_invert = 0;
|
|
} else {
|
|
data->gpio_chip_en_invert = 0;
|
|
}
|
|
|
|
data->gpio_wlan_hostwake = of_get_named_gpio_flags(np, "wlan_hostwake",
|
|
0, (enum of_gpio_flags *)&config);
|
|
if (!gpio_is_valid(data->gpio_wlan_hostwake)) {
|
|
dev_err(dev, "get gpio wlan_hostwake failed\n");
|
|
} else {
|
|
dev_info(dev,
|
|
"wlan_hostwake gpio=%d mul-sel=%d pull=%d drv_level=%d data=%d\n",
|
|
config.gpio,
|
|
config.mul_sel,
|
|
config.pull,
|
|
config.drv_level,
|
|
config.data);
|
|
|
|
ret = devm_gpio_request(dev, data->gpio_wlan_hostwake,
|
|
"wlan_hostwake");
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't request wlan_hostwake gpio %d\n",
|
|
data->gpio_wlan_hostwake);
|
|
return ret;
|
|
}
|
|
|
|
gpio_direction_input(data->gpio_wlan_hostwake);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"can't request input direction wlan_hostwake gpio %d\n",
|
|
data->gpio_wlan_hostwake);
|
|
return ret;
|
|
}
|
|
|
|
ret = enable_gpio_wakeup_src(data->gpio_wlan_hostwake);
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't enable wakeup src for wlan_hostwake %d\n",
|
|
data->gpio_wlan_hostwake);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
data->lpo = devm_clk_get(dev, NULL);
|
|
if (IS_ERR_OR_NULL(data->lpo)) {
|
|
dev_warn(dev, "clk not config\n");
|
|
} else {
|
|
ret = clk_prepare_enable(data->lpo);
|
|
if (ret < 0)
|
|
dev_warn(dev, "can't enable clk\n");
|
|
}
|
|
|
|
ret = misc_register(&sunxi_wlan_dev);
|
|
if (ret) {
|
|
dev_err(dev, "sunxi-wlan register driver as misc device error!\n");
|
|
return ret;
|
|
}
|
|
ret = sysfs_create_group(&sunxi_wlan_dev.this_device->kobj,
|
|
&misc_attribute_group);
|
|
if (ret) {
|
|
dev_err(dev, "sunxi-wlan register sysfs create group failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
data->power_state = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_wlan_remove(struct platform_device *pdev)
|
|
{
|
|
misc_deregister(&sunxi_wlan_dev);
|
|
sysfs_remove_group(&(sunxi_wlan_dev.this_device->kobj),
|
|
&misc_attribute_group);
|
|
|
|
if (!IS_ERR_OR_NULL(wlan_data->lpo))
|
|
clk_disable_unprepare(wlan_data->lpo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sunxi_wlan_ids[] = {
|
|
{ .compatible = "allwinner,sunxi-wlan" },
|
|
{ /* Sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver sunxi_wlan_driver = {
|
|
.probe = sunxi_wlan_probe,
|
|
.remove = sunxi_wlan_remove,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "sunxi-wlan",
|
|
.of_match_table = sunxi_wlan_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sunxi_wlan_driver);
|
|
|
|
MODULE_DESCRIPTION("sunxi wlan driver");
|
|
MODULE_LICENSE(GPL);
|