40 lines
1.5 KiB
Plaintext
40 lines
1.5 KiB
Plaintext
config instance
|
|
# Set to 1 to enable nodogsplash
|
|
option enabled 0
|
|
|
|
# Use plain configuration file as well
|
|
#option config '/etc/nodogsplash/nodogsplash.conf'
|
|
option network 'lan'
|
|
option gatewayname 'OpenWrt Nodogsplash'
|
|
option maxclients '250'
|
|
option idletimeout '1200'
|
|
|
|
# Your router may have several interfaces, and you
|
|
# probably want to keep them private from the network/gatewayinterface.
|
|
# If so, you should block the entire subnets on those interfaces, e.g.:
|
|
list authenticated_users 'block to 192.168.0.0/16'
|
|
list authenticated_users 'block to 10.0.0.0/8'
|
|
|
|
# Typical ports you will probably want to open up.
|
|
list authenticated_users 'allow tcp port 22'
|
|
list authenticated_users 'allow tcp port 53'
|
|
list authenticated_users 'allow udp port 53'
|
|
list authenticated_users 'allow tcp port 80'
|
|
list authenticated_users 'allow tcp port 443'
|
|
|
|
# For preauthenticated users to resolve IP addresses in their
|
|
# initial request not using the router itself as a DNS server,
|
|
list preauthenticated_users 'allow tcp port 53'
|
|
list preauthenticated_users 'allow udp port 53'
|
|
|
|
# Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
|
|
list users_to_router 'allow tcp port 22'
|
|
list users_to_router 'allow tcp port 23'
|
|
list users_to_router 'allow tcp port 53'
|
|
list users_to_router 'allow udp port 53'
|
|
list users_to_router 'allow udp port 67'
|
|
list users_to_router 'allow tcp port 80'
|
|
list users_to_router 'allow tcp port 443'
|
|
|
|
# See https://github.com/nodogsplash for a full list of available options.
|