/* * drivers/input/sensor/sunxi_gpadc.h * * Copyright (C) 2016 Allwinner. * fuzhaoke * * SUNXI GPADC Controller Driver Header * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ #ifndef SUNXI_GPADC_H #define SUNXI_GPADC_H #define GPADC_DEV_NAME ("sunxi-gpadc") #define OSC_24MHZ (24000000UL) #define MAX_SR (100000UL) #define MIN_SR (400UL) #define DEFAULT_SR (1000UL) /* voltage range 0~2.3v, unit is uv */ #define VOL_RANGE (1800000UL) #define VOL_VALUE_MASK (0Xfff) /* GPADC register offset */ #define GP_SR_REG (0x00) /* Sample Rate config register */ #define GP_CTRL_REG (0x04) /* control register */ #define GP_CS_EN_REG (0x08) /* compare and select enable register */ #define GP_FIFO_INTC_REG (0x0c) /* FIFO interrupt config register */ #define GP_FIFO_INTS_REG (0x10) /* FIFO interrupt status register */ #define GP_FIFO_DATA_REG (0X14) /* FIFO data register */ #define GP_CB_DATA_REG (0X18) /* calibration data register */ #define GP_DATAL_INTC_REG (0x20) #define GP_DATAH_INTC_REG (0x24) #define GP_DATA_INTC_REG (0x28) #define GP_DATAL_INTS_REG (0x30) #define GP_DATAH_INTS_REG (0x34) #define GP_DATA_INTS_REG (0x38) #define GP_CH0_CMP_DATA_REG (0x40) /* channal 0 compare data register */ #define GP_CH1_CMP_DATA_REG (0x44) /* channal 1 compare data register */ #define GP_CH2_CMP_DATA_REG (0x48) /* channal 2 compare data register */ #define GP_CH3_CMP_DATA_REG (0x4c) /* channal 3 compare data register */ #define GP_CH4_CMP_DATA_REG (0x50) /* channal 4 compare data register */ #define GP_CH5_CMP_DATA_REG (0x54) /* channal 5 compare data register */ #define GP_CH6_CMP_DATA_REG (0x58) /* channal 6 compare data register */ #define GP_CH7_CMP_DATA_REG (0x5c) /* channal 7 compare data register */ #define GP_CH0_DATA_REG (0x80) /* channal 0 data register */ #define GP_CH1_DATA_REG (0x84) /* channal 1 data register */ #define GP_CH2_DATA_REG (0x88) /* channal 2 data register */ #define GP_CH3_DATA_REG (0x8c) /* channal 3 data register */ #define GP_CH4_DATA_REG (0x90) /* channal 4 data register */ #define GP_CH5_DATA_REG (0x94) /* channal 5 data register */ #define GP_CH6_DATA_REG (0x98) /* channal 6 data register */ #define GP_CH7_DATA_REG (0x9c) /* channal 7 data register */ /* * GP_SR_REG default value: 0x01df_002f 50KHZ * sample_rate = clk_in/(n+1) = 24MHZ/(0x1df + 1) = 50KHZ */ #define GP_SR_CON (0xffff << 16) /* GP_CTRL_REG default value:0x0000_0000 */ #define GP_FIRST_CONCERT_DLY (0xff<<24) /* delay time of the first time */ #define GP_CALI_EN (1 << 17) /* enable calibration */ #define GP_ADC_EN (1 << 16) /* GPADC function enable */ /* * 00:single conversion mode * 01:single-cycle conversion mode * 10:continuous mode, 11:burst mode */ #define GP_MODE_SELECT (3 << 8) /* 0:disable, 1:enable */ #define GP_CH7_CMP_EN (1 << 23) #define GP_CH6_CMP_EN (1 << 22) #define GP_CH5_CMP_EN (1 << 21) #define GP_CH4_CMP_EN (1 << 20) #define GP_CH3_CMP_EN (1 << 19) #define GP_CH2_CMP_EN (1 << 18) #define GP_CH1_CMP_EN (1 << 17) #define GP_CH0_CMP_EN (1 << 16) #define GP_CH7_SELECT (1 << 7) #define GP_CH6_SELECT (1 << 6) #define GP_CH5_SELECT (1 << 5) #define GP_CH4_SELECT (1 << 4) #define GP_CH3_SELECT (1 << 3) #define GP_CH2_SELECT (1 << 2) #define GP_CH1_SELECT (1 << 1) #define GP_CH0_SELECT (1 << 0) /* * GP_FIFO_INTC_REG default value: 0x0000_0f00 * 0:disable, 1:enable */ #define FIFO_OVER_IRQ_EN (1 << 17) /* fifo over run irq enable */ #define FIFO_DATA_IRQ_EN (1 << 16) /* fifo data irq enable */ /* write 1 to flush TX FIFO, self clear to 0 */ #define FIFO_FLUSH (1 << 4) /* * GP_FIFO_INTS_REG default value: 0x0000_0000 * 0:no pending irq, 1: over pending, need write 1 to clear flag */ #define FIFO_OVER_PEND (1 << 17) /* fifo over pending flag */ #define FIFO_DATA_PEND (1 << 16) /* fifo data pending flag */ #define FIFO_CNT (0x3f << 8) /* the data count in fifo */ /* GP_FIFO_DATA_REG default value: 0x0000_0000 */ #define GP_FIFO_DATA (0xfff << 0) /* GPADC data in fifo */ /* GP_CB_DATA_REG default value: 0x0000_0000 */ #define GP_CB_DATA (0xfff << 0) /* GPADC calibration data */ /* GP_INTC_REG default value: 0x0000_0000 */ #define GP_CH7_LOW_IRQ_EN (1 << 7) /* 0:disable, 1:enable */ #define GP_CH6_LOW_IRQ_EN (1 << 6) #define GP_CH5_LOW_IRQ_EN (1 << 5) #define GP_CH4_LOW_IRQ_EN (1 << 4) #define GP_CH3_LOW_IRQ_EN (1 << 3) #define GP_CH2_LOW_IRQ_EN (1 << 2) #define GP_CH1_LOW_IRQ_EN (1 << 1) #define GP_CH0_LOW_IRQ_EN (1 << 0) #define GP_CH7_HIG_IRQ_EN (1 << 7) #define GP_CH6_HIG_IRQ_EN (1 << 6) #define GP_CH5_HIG_IRQ_EN (1 << 5) #define GP_CH4_HIG_IRQ_EN (1 << 4) #define GP_CH3_HIG_IRQ_EN (1 << 3) #define GP_CH2_HIG_IRQ_EN (1 << 2) #define GP_CH1_HIG_IRQ_EN (1 << 1) #define GP_CH0_HIG_IRQ_EN (1 << 0) #define GP_CH7_DATA_IRQ_EN (1 << 7) #define GP_CH6_DATA_IRQ_EN (1 << 6) #define GP_CH5_DATA_IRQ_EN (1 << 5) #define GP_CH4_DATA_IRQ_EN (1 << 4) #define GP_CH3_DATA_IRQ_EN (1 << 3) #define GP_CH2_DATA_IRQ_EN (1 << 2) #define GP_CH1_DATA_IRQ_EN (1 << 1) #define GP_CH0_DATA_IRQ_EN (1 << 0) /* GP_INTS_REG default value: 0x0000_0000 */ #define GP_CH7_LOW (1 << 7) /* 0:no pending, 1:pending */ #define GP_CH6_LOW (1 << 6) #define GP_CH5_LOW (1 << 5) #define GP_CH4_LOW (1 << 4) #define GP_CH3_LOW (1 << 3) #define GP_CH2_LOW (1 << 2) #define GP_CH1_LOW (1 << 1) #define GP_CH0_LOW (1 << 0) #define GP_CH7_HIG (1 << 7) #define GP_CH6_HIG (1 << 6) #define GP_CH5_HIG (1 << 5) #define GP_CH4_HIG (1 << 4) #define GP_CH3_HIG (1 << 3) #define GP_CH2_HIG (1 << 2) #define GP_CH1_HIG (1 << 1) #define GP_CH0_HIG (1 << 0) #define GP_CH7_DATA (1 << 7) #define GP_CH6_DATA (1 << 6) #define GP_CH5_DATA (1 << 5) #define GP_CH4_DATA (1 << 4) #define GP_CH3_DATA (1 << 3) #define GP_CH2_DATA (1 << 2) #define GP_CH1_DATA (1 << 1) #define GP_CH0_DATA (1 << 0) /* GP_CH0_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH0_CMP_HIG_DATA (0xfff << 16) #define GP_CH0_CMP_LOW_DATA (0xfff << 0) /* GP_CH1_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH1_CMP_HIG_DATA (0xfff << 16) #define GP_CH1_CMP_LOW_DATA (0xfff << 0) /* GP_CH2_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH2_CMP_HIG_DATA (0xfff << 16) #define GP_CH2_CMP_LOW_DATA (0xfff << 0) /* GP_CH3_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH3_CMP_HIG_DATA (0xfff << 16) #define GP_CH3_CMP_LOW_DATA (0xfff << 0) /* GP_CH4_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH4_CMP_HIG_DATA (0xfff << 16) #define GP_CH4_CMP_LOW_DATA (0xfff << 0) /* GP_CH5_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH5_CMP_HIG_DATA (0xfff << 16) #define GP_CH5_CMP_LOW_DATA (0xfff << 0) /* GP_CH6_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH6_CMP_HIG_DATA (0xfff << 16) #define GP_CH6_CMP_LOW_DATA (0xfff << 0) /* GP_CH7_CMP_DATA_REG default value 0x0bff_0400 */ #define GP_CH7_CMP_HIG_DATA (0xfff << 16) #define GP_CH7_CMP_LOW_DATA (0xfff << 0) /* GP_CH0_DATA_REG default value:0x0000_0000 */ #define GP_CH0_DATA_MASK (0xfff << 0) /* channel 0 data mask */ /* GP_CH1_DATA_REG default value:0x0000_0000 */ #define GP_CH1_DATA_MASK (0xfff << 0) /* channel 1 data mask */ /* GP_CH2_DATA_REG default value:0x0000_0000 */ #define GP_CH2_DATA_MASK (0xfff << 0) /* channel 2 data mask */ /* GP_CH3_DATA_REG default value:0x0000_0000 */ #define GP_CH3_DATA_MASK (0xfff << 0) /* channel 3 data mask */ /* GP_CH4_DATA_REG default value:0x0000_0000 */ #define GP_CH4_DATA_MASK (0xfff << 0) /* channel 4 data mask */ /* GP_CH5_DATA_REG default value:0x0000_0000 */ #define GP_CH5_DATA_MASK (0xfff << 0) /* channel 5 data mask */ /* GP_CH6_DATA_REG default value:0x0000_0000 */ #define GP_CH6_DATA_MASK (0xfff << 0) /* channel 6 data mask */ /* GP_CH7_DATA_REG default value:0x0000_0000 */ #define GP_CH7_DATA_MASK (0xfff << 0) /* channel 7 data mask */ #define GP_CALIBRATION_ENABLE (0x1 << 17) #define CHANNEL_0_SELECT 0x01 #define CHANNEL_1_SELECT 0x02 #define CHANNEL_2_SELECT 0x04 #define CHANNEL_3_SELECT 0x08 #define CHANNEL_4_SELECT 0x10 #define CHANNEL_5_SELECT 0x20 #define CHANNEL_6_SELECT 0x40 #define CHANNEL_7_SELECT 0x80 #define CHANNEL_MAX_NUM 8 #define KEY_MAX_CNT (13) #define VOL_NUM KEY_MAX_CNT #define MAXIMUM_INPUT_VOLTAGE 1800 #define DEVIATION 100 #define SUNXIKEY_DOWN (MAXIMUM_INPUT_VOLTAGE-DEVIATION) #define SUNXIKEY_UP SUNXIKEY_DOWN #define MAXIMUM_SCALE 128 #define SCALE_UNIT (MAXIMUM_INPUT_VOLTAGE/MAXIMUM_SCALE) #define SAMPLING_FREQUENCY 10 enum { DEBUG_INFO = 1U << 0, DEBUG_RUN = 1U << 1, }; enum gp_select_mode { GP_SINGLE_MODE = 0, GP_SINGLE_CYCLE_MODE, GP_CONTINUOUS_MODE, GP_BURST_MODE, }; enum gp_channel_id { GP_CH_0 = 0, GP_CH_1, GP_CH_2, GP_CH_3, GP_CH_4, GP_CH_5, GP_CH_6, GP_CH_7, }; struct sunxi_config { u32 channel_select; u32 channel_data_select; u32 channel_compare_select; u32 channel_cld_select; u32 channel_chd_select; u32 channel_compare_lowdata[CHANNEL_MAX_NUM]; u32 channel_compare_higdata[CHANNEL_MAX_NUM]; }; struct sunxi_gpadc { struct platform_device *pdev; struct input_dev *input_gpadc[CHANNEL_MAX_NUM]; struct sunxi_config gpadc_config; struct clk *mclk; struct clk *pclk; void __iomem *reg_base; int irq_num; u32 channel_num; u32 scankeycodes[KEY_MAX_CNT]; u32 gpadc_sample_rate; char key_name[16]; u32 key_num; u8 key_cnt; u8 compare_before; u8 compare_later; u8 key_code; u32 key_val; }; struct status_reg { char *pst; char *ped; unsigned char channel; unsigned char val; }; struct vol_reg { char *pst; char *ped; unsigned char index; unsigned long vol; }; struct sr_reg { char *pst; unsigned long val; }; struct filter_reg { char *pst; unsigned long val; }; #endif