/*
 *drivers/input/touchscreen/ft5x_ts.h
 *
 * FocalTech ft5x TouchScreen driver.
 *
 * Copyright (c) 2010  Focal tech Ltd.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 *
 */

#ifndef __LINUX_FT5X_TS_H__
#define __LINUX_FT5X_TS_H__

// gpio base address
#define CONFIG_FT5X0X_MULTITOUCH     (1)
#define CALIBRATION  (1)
#define UPGRADE   (5)
//#define CALIBRATION _IO(CALIBRATION_FLAG,0)
//#define UPDRAGE _IO(UPDRAGE_FLAG,0)
#define I2C_MINORS 	256
#define I2C_MAJOR 	125

#undef  AW_GPIO_INT_API_ENABLE
//#define AW_FPGA_SIM
#ifdef AW_FPGA_SIM
#endif

#define AW_GPIO_API_ENABLE
//#undef CONFIG_HAS_EARLYSUSPEND
//#define CONFIG_HAS_EARLYSUSPEND
struct ft5x_ts_platform_data{
	u16	intr;		/* irq number	*/
};

enum ft5x_ts_regs {
	FT5X0X_REG_PMODE	= 0xA5,	/* Power Consume Mode		*/
};

//FT5X0X_REG_PMODE
#define PMODE_ACTIVE        0x00
#define PMODE_MONITOR       0x01
#define PMODE_STANDBY       0x02
#define PMODE_HIBERNATE     0x03



/*upgrade config of FT5606*/
#define FT5606_UPGRADE_AA_DELAY 		50
#define FT5606_UPGRADE_55_DELAY 		10
#define FT5606_UPGRADE_ID_1			0x79
#define FT5606_UPGRADE_ID_2			0x06
#define FT5606_UPGRADE_READID_DELAY 	100
/*upgrade config of FT5x06(x=2,3,4)*/
#define FT5X06_UPGRADE_AA_DELAY 		50
#define FT5X06_UPGRADE_55_DELAY 		30
#define FT5X06_UPGRADE_ID_1			0x79
#define FT5X06_UPGRADE_ID_2			0x03
#define FT5X06_UPGRADE_READID_DELAY 	1
/*upgrade config of FT5316*/
#define FT5316_UPGRADE_AA_DELAY 		50
#define FT5316_UPGRADE_55_DELAY 		30
#define FT5316_UPGRADE_ID_1			0x79
#define FT5316_UPGRADE_ID_2			0x07
#define FT5316_UPGRADE_READID_DELAY 	1
#define FT5316_UPGRADE_EARSE_DELAY	1500



#ifndef ABS_MT_TOUCH_MAJOR
    #define ABS_MT_TOUCH_MAJOR	0x30	/* touching ellipse */
    #define ABS_MT_TOUCH_MINOR	0x31	/* (omit if circular) */
    #define ABS_MT_WIDTH_MAJOR	0x32	/* approaching ellipse */
    #define ABS_MT_WIDTH_MINOR	0x33	/* (omit if circular) */
    #define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
    #define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
    #define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
    #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
    #define ABS_MT_BLOB_ID		0x38	/* Group set of pkts as blob */
#endif /* ABS_MT_TOUCH_MAJOR */


#endif