#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

#include <aw_softap_intf.h>

int main(int argc, char **argv)
{
    int i = 0;
    int len = 0;
    tSOFTAP_KEY_MGMT key_mgmt = SOFTAP_WPA2_PSK;
    int ret = 0;

    ret = aw_softap_init();
    if(0 != ret)
    {
        printf("init softap failed!\n");
        return -1;
    }


    printf("***************************\n");
    printf("Start hostapd test!\n");
    printf("***************************\n");
#ifdef BCMDHD

    ret = aw_softap_reload_firmware("AP");
    if(0 != ret)
    {
        printf("reload firmware failed!\n");
        return -1;
    }
#endif

/*
//just a example for use of configuration API,
//comment out the part since we use default configuration for this demo
    ret = aw_softap_config("Aw_Softap_Test", "wifi1111", key_mgmt, "wlan0", "6", "broadcast");
    if(0 != ret)
    {
        printf("config softap failed!\n");
        return -1;
    }
*/
    ret = aw_softap_save_config();
    if(0 != ret)
    {
        printf("save config failed!\n");
        return -1;
    }

    ret = aw_softap_enable();
    if(0 != ret)
    {
        printf("enable softap failed!\n");
        return -1;
    }

    ret = aw_softap_router_config("192.168.5.1", "255.255.255.0");
    if(0 != ret)
    {
        printf("config IP and maskcode failed!\n");
        return -1;
    }
//	system("udhcpd /etc/wifi/udhcpd.conf");
//	usleep(500000);
    ret = aw_softap_start_udhcp_dns_server();
    if(0 != ret)
    {
        printf("start udhcp and dns server failed!\n");
        return -1;
    }

    ret = aw_softap_enable_data_forward("eth0");
    if(0 != ret)
    {
        printf("enable data forward failed!\n");
        return -1;
    }

    printf("***************************\n");
    printf("Hostapd test successed!\n");
    printf("***************************\n");

    ret = aw_softap_deinit();
    if(0 != ret)
    {
        printf("deinit failed!\n");
        return -1;
    }
    return 0;
}