41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
|
;
|
||
|
|
; This is a minimal sample xl2tpd configuration file for use
|
||
|
|
; with L2TP over IPsec.
|
||
|
|
;
|
||
|
|
; The idea is to provide an L2TP daemon to which remote Windows L2TP/IPsec
|
||
|
|
; clients connect. In this example, the internal (protected) network
|
||
|
|
; is 192.168.1.0/24. A special IP range within this network is reserved
|
||
|
|
; for the remote clients: 192.168.1.128/25
|
||
|
|
; (i.e. 192.168.1.128 ... 192.168.1.254)
|
||
|
|
;
|
||
|
|
; The listen-addr parameter can be used if you want to bind the L2TP daemon
|
||
|
|
; to a specific IP address instead of to all interfaces. For instance,
|
||
|
|
; you could bind it to the interface of the internal LAN (e.g. 192.168.1.98
|
||
|
|
; in the example below). Yet another IP address (local ip, e.g. 192.168.1.99)
|
||
|
|
; will be used by xl2tpd as its address on pppX interfaces.
|
||
|
|
|
||
|
|
[global]
|
||
|
|
; listen-addr = 192.168.1.98
|
||
|
|
;
|
||
|
|
; requires openswan-2.5.18 or higher - Also does not yet work in combination
|
||
|
|
; with kernel mode l2tp as present in linux 2.6.23+
|
||
|
|
; ipsec saref = yes
|
||
|
|
; Use refinfo of 22 if using an SAref kernel patch based on openswan 2.6.35 or
|
||
|
|
; when using any of the SAref kernel patches for kernels up to 2.6.35.
|
||
|
|
; saref refinfo = 30
|
||
|
|
;
|
||
|
|
; force userspace = yes
|
||
|
|
;
|
||
|
|
; debug tunnel = yes
|
||
|
|
|
||
|
|
[lns default]
|
||
|
|
ip range = 192.168.1.128-192.168.1.254
|
||
|
|
local ip = 192.168.1.99
|
||
|
|
require chap = yes
|
||
|
|
refuse pap = yes
|
||
|
|
require authentication = yes
|
||
|
|
name = LinuxVPNserver
|
||
|
|
ppp debug = yes
|
||
|
|
pppoptfile = /etc/ppp/options.xl2tpd
|
||
|
|
length bit = yes
|