cmhi
/
f-stack
mirror of https://github.com/F-Stack/f-stack.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
f-stack/dpdk/doc/guides/nics/bnx2x.rst

245 lines
7.8 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. BSD LICENSE
Copyright (c) 2015 QLogic Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of QLogic Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
BNX2X Poll Mode Driver
======================
The BNX2X poll mode driver library (**librte_pmd_bnx2x**) implements support
for **QLogic 578xx** 10/20 Gbps family of adapters as well as their virtual
functions (VF) in SR-IOV context. It is supported on several standard Linux
distros like RHEL and SLES. It is compile-tested under FreeBSD OS.
More information can be found at `QLogic Corporation's Official Website
<http://www.qlogic.com>`_.
Supported Features
------------------
BNX2X PMD has support for:
- Base L2 features
- Unicast/multicast filtering
- Promiscuous mode
- Port hardware statistics
- SR-IOV VF
Non-supported Features
----------------------
The features not yet supported include:
- TSS (Transmit Side Scaling)
- RSS (Receive Side Scaling)
- LRO/TSO offload
- Checksum offload
- SR-IOV PF
- Rx TX scatter gather
Co-existence considerations
---------------------------
- QLogic 578xx CNAs support Ethernet, iSCSI and FCoE functionalities.
These functionalities are supported using QLogic Linux kernel
drivers bnx2x, cnic, bnx2i and bnx2fc. DPDK is supported on these
adapters using bnx2x PMD.
- When SR-IOV is not enabled on the adapter,
QLogic Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) and bnx2x
PMD can’t be attached to different PFs on a given QLogic 578xx
adapter.
A given adapter needs to be completely used by DPDK or Linux drivers.
Before binding DPDK driver to one or more PFs on the adapter,
please make sure to unbind Linux drivers from all PFs of the adapter.
If there are multiple adapters on the system, one or more adapters
can be used by DPDK driver completely and other adapters can be used
by Linux drivers completely.
- When SR-IOV is enabled on the adapter,
Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) can be bound
to the PFs of a given adapter and either bnx2x PMD or Linux drivers
bnx2x can be bound to the VFs of the adapter.
Supported QLogic NICs
---------------------
- 578xx
Prerequisites
-------------
- Requires firmware version **7.2.51.0**. It is included in most of the
standard Linux distros. If it is not available visit
`linux-firmware git repository <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/bnx2x/bnx2x-e2-7.2.51.0.fw>`_
to get the required firmware.
Pre-Installation Configuration
------------------------------
Config File Options
~~~~~~~~~~~~~~~~~~~
The following options can be modified in the ``.config`` file. Please note that
enabling debugging options may affect system performance.
- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **n**)
Toggle compilation of bnx2x driver. To use bnx2x PMD set this config parameter
to 'y'. Also, in order for firmware binary to load user will need zlib devel
package installed.
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**)
Toggle display of transmit fast path run-time messages.
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX`` (default **n**)
Toggle display of receive fast path run-time messages.
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC`` (default **n**)
Toggle display of register reads and writes.
.. _bnx2x_driver-compilation:
Driver compilation and testing
------------------------------
Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
for details.
SR-IOV: Prerequisites and sample Application Notes
--------------------------------------------------
This section provides instructions to configure SR-IOV with Linux OS.
#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``:
.. code-block:: console
lspci -s <slot> -vvv
Example output:
.. code-block:: console
[...]
Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI)
[...]
Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV)
[...]
Kernel driver in use: igb_uio
#. Load the kernel module:
.. code-block:: console
modprobe bnx2x
Example output:
.. code-block:: console
systemd-udevd[4848]: renamed network interface eth0 to ens5f0
systemd-udevd[4848]: renamed network interface eth1 to ens5f1
#. Bring up the PF ports:
.. code-block:: console
ifconfig ens5f0 up
ifconfig ens5f1 up
#. Create VF device(s):
Echo the number of VFs to be created into "sriov_numvfs" sysfs entry
of the parent PF.
Example output:
.. code-block:: console
echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs
#. Assign VF MAC address:
Assign MAC address to the VF using iproute2 utility. The syntax is:
ip link set <PF iface> vf <VF id> mac <macaddr>
Example output:
.. code-block:: console
ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8
#. PCI Passthrough:
The VF devices may be passed through to the guest VM using virt-manager or
virsh etc. bnx2x PMD should be used to bind the VF devices in the guest VM
using the instructions outlined in the Application notes below.
#. Running testpmd:
(Supply ``--log-level="pmd.net.bnx2x.driver",7`` to view informational messages):
Follow instructions available in the document
:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
to run testpmd.
Example output:
.. code-block:: console
[...]
EAL: PCI device 0000:84:00.0 on NUMA socket 1
EAL: probe driver: 14e4:168e rte_bnx2x_pmd
EAL: PCI memory mapped at 0x7f14f6fe5000
EAL: PCI memory mapped at 0x7f14f67e5000
EAL: PCI memory mapped at 0x7f15fbd9b000
EAL: PCI device 0000:84:00.1 on NUMA socket 1
EAL: probe driver: 14e4:168e rte_bnx2x_pmd
EAL: PCI memory mapped at 0x7f14f5fe5000
EAL: PCI memory mapped at 0x7f14f57e5000
EAL: PCI memory mapped at 0x7f15fbd4f000
Interactive-mode selected
Configuring Port 0 (socket 0)
PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=512, thresh=512,
usable_bd=1020, total_bd=1024,
tx_pages=4
PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=128, thresh=0,
usable_bd=510, total_bd=512,
rx_pages=1, cq_pages=8
PMD: bnx2x_print_adapter_info():
[...]
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
Done
testpmd>
Reference in New Issue View Git Blame Copy Permalink