f-stack/dpdk/drivers/net/sfc/base/efx_check.h

368 lines
10 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2012-2018 Solarflare Communications Inc.
* All rights reserved.
*/
#ifndef _SYS_EFX_CHECK_H
#define _SYS_EFX_CHECK_H
#include "efsys.h"
/*
* Check that the efsys.h header in client code has a valid combination of
* EFSYS_OPT_xxx options.
*
* NOTE: Keep checks for obsolete options here to ensure that they are removed
* from client code (and do not reappear in merges from other branches).
*/
#ifdef EFSYS_OPT_FALCON
# error "FALCON is obsolete and is not supported."
#endif
#if EFSYS_OPT_BOOTCFG
/* Support NVRAM based boot config */
# if !EFSYS_OPT_NVRAM
# error "BOOTCFG requires NVRAM"
# endif
#endif /* EFSYS_OPT_BOOTCFG */
#if EFSYS_OPT_CHECK_REG
/* Verify chip implements accessed registers */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "CHECK_REG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_CHECK_REG */
#if EFSYS_OPT_DECODE_INTR_FATAL
/* Decode fatal errors */
# if !EFSYS_OPT_SIENA
# error "INTR_FATAL requires SIENA"
# endif
#endif /* EFSYS_OPT_DECODE_INTR_FATAL */
#if EFSYS_OPT_DIAG
/* Support diagnostic hardware tests */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "DIAG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_DIAG */
#if EFSYS_OPT_EV_PREFETCH
/* Support optimized EVQ data access */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "EV_PREFETCH requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_EV_PREFETCH */
#ifdef EFSYS_OPT_FALCON_NIC_CFG_OVERRIDE
# error "FALCON_NIC_CFG_OVERRIDE is obsolete and is not supported."
#endif
#if EFSYS_OPT_FILTER
/* Support hardware packet filters */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "FILTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_FILTER */
#if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# if !EFSYS_OPT_FILTER
# error "HUNTINGTON or MEDFORD or MEDFORD2 requires FILTER"
# endif
#endif /* EFSYS_OPT_HUNTINGTON */
#if EFSYS_OPT_LOOPBACK
/* Support hardware loopback modes */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "LOOPBACK requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_LOOPBACK */
#ifdef EFSYS_OPT_MAC_FALCON_GMAC
# error "MAC_FALCON_GMAC is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_MAC_FALCON_XMAC
# error "MAC_FALCON_XMAC is obsolete and is not supported."
#endif
#if EFSYS_OPT_MAC_STATS
/* Support MAC statistics */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "MAC_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_MAC_STATS */
#if EFSYS_OPT_MCDI
/* Support management controller messages */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_MCDI */
#if (EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# if !EFSYS_OPT_MCDI
# error "SIENA or HUNTINGTON or MEDFORD or MEDFORD2 requires MCDI"
# endif
#endif
#if EFSYS_OPT_MCDI_LOGGING
/* Support MCDI logging */
# if !EFSYS_OPT_MCDI
# error "MCDI_LOGGING requires MCDI"
# endif
#endif /* EFSYS_OPT_MCDI_LOGGING */
#if EFSYS_OPT_MCDI_PROXY_AUTH
/* Support MCDI proxy authorization */
# if !EFSYS_OPT_MCDI
# error "MCDI_PROXY_AUTH requires MCDI"
# endif
#endif /* EFSYS_OPT_MCDI_PROXY_AUTH */
#ifdef EFSYS_OPT_MON_LM87
# error "MON_LM87 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_MON_MAX6647
# error "MON_MAX6647 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_MON_NULL
# error "MON_NULL is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_MON_SIENA
# error "MON_SIENA is obsolete (replaced by MON_MCDI)."
#endif
#ifdef EFSYS_OPT_MON_HUNTINGTON
# error "MON_HUNTINGTON is obsolete (replaced by MON_MCDI)."
#endif
#if EFSYS_OPT_MON_STATS
/* Support monitor statistics (voltage/temperature) */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "MON_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_MON_STATS */
#if EFSYS_OPT_MON_MCDI
/* Support Monitor via mcdi */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "MON_MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_MON_MCDI*/
#if EFSYS_OPT_NAMES
/* Support printable names for statistics */
# if !(EFSYS_OPT_LOOPBACK || EFSYS_OPT_MAC_STATS || EFSYS_OPT_MCDI || \
EFSYS_MON_STATS || EFSYS_OPT_PHY_STATS || EFSYS_OPT_QSTATS)
# error "NAMES requires LOOPBACK or xxxSTATS or MCDI"
# endif
#endif /* EFSYS_OPT_NAMES */
#if EFSYS_OPT_NVRAM
/* Support non volatile configuration */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "NVRAM requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_NVRAM */
#if EFSYS_OPT_IMAGE_LAYOUT
/* Support signed image layout handling */
# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "IMAGE_LAYOUT requires MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_IMAGE_LAYOUT */
#ifdef EFSYS_OPT_NVRAM_FALCON_BOOTROM
# error "NVRAM_FALCON_BOOTROM is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_NVRAM_SFT9001
# error "NVRAM_SFT9001 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_NVRAM_SFX7101
# error "NVRAM_SFX7101 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PCIE_TUNE
# error "PCIE_TUNE is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_BIST
# error "PHY_BIST is obsolete (replaced by BIST)."
#endif
#if EFSYS_OPT_PHY_FLAGS
/* Support PHY flags */
# if !EFSYS_OPT_SIENA
# error "PHY_FLAGS requires SIENA"
# endif
#endif /* EFSYS_OPT_PHY_FLAGS */
#if EFSYS_OPT_PHY_LED_CONTROL
/* Support for PHY LED control */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "PHY_LED_CONTROL requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_PHY_LED_CONTROL */
#ifdef EFSYS_OPT_PHY_NULL
# error "PHY_NULL is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_PM8358
# error "PHY_PM8358 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_PROPS
# error "PHY_PROPS is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_QT2022C2
# error "PHY_QT2022C2 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_QT2025C
# error "PHY_QT2025C is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_SFT9001
# error "PHY_SFT9001 is obsolete and is not supported."
#endif
#ifdef EFSYS_OPT_PHY_SFX7101
# error "PHY_SFX7101 is obsolete and is not supported."
#endif
#if EFSYS_OPT_PHY_STATS
/* Support PHY statistics */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
# error "PHY_STATS requires SIENA or HUNTINGTON or MEDFORD"
# endif
#endif /* EFSYS_OPT_PHY_STATS */
#ifdef EFSYS_OPT_PHY_TXC43128
# error "PHY_TXC43128 is obsolete and is not supported."
#endif
#if EFSYS_OPT_QSTATS
/* Support EVQ/RXQ/TXQ statistics */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "QSTATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_QSTATS */
#ifdef EFSYS_OPT_RX_HDR_SPLIT
# error "RX_HDR_SPLIT is obsolete and is not supported"
#endif
#if EFSYS_OPT_RX_SCALE
/* Support receive scaling (RSS) */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "RX_SCALE requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_RX_SCALE */
#if EFSYS_OPT_RX_SCATTER
/* Support receive scatter DMA */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "RX_SCATTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_RX_SCATTER */
#ifdef EFSYS_OPT_STAT_NAME
# error "STAT_NAME is obsolete (replaced by NAMES)."
#endif
#if EFSYS_OPT_VPD
/* Support PCI Vital Product Data (VPD) */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "VPD requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_VPD */
#ifdef EFSYS_OPT_WOL
# error "WOL is obsolete and is not supported"
#endif /* EFSYS_OPT_WOL */
#ifdef EFSYS_OPT_MCAST_FILTER_LIST
# error "MCAST_FILTER_LIST is obsolete and is not supported"
#endif
#if EFSYS_OPT_BIST
/* Support BIST */
# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "BIST requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_BIST */
#if EFSYS_OPT_LICENSING
/* Support MCDI licensing API */
# if !EFSYS_OPT_MCDI
# error "LICENSING requires MCDI"
# endif
# if !EFSYS_HAS_UINT64
# error "LICENSING requires UINT64"
# endif
#endif /* EFSYS_OPT_LICENSING */
#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
/* Support adapters with missing static config (for factory use only) */
# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "ALLOW_UNCONFIGURED_NIC requires MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
#if EFSYS_OPT_RX_PACKED_STREAM
/* Support packed stream mode */
# if !(EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "PACKED_STREAM requires HUNTINGTON or MEDFORD or MEDFORD2"
# endif
#endif
#if EFSYS_OPT_RX_ES_SUPER_BUFFER
/* Support equal stride super-buffer mode */
# if !(EFSYS_OPT_MEDFORD2)
# error "ES_SUPER_BUFFER requires MEDFORD2"
# endif
#endif
/* Support hardware assistance for tunnels */
#if EFSYS_OPT_TUNNEL
# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
# error "TUNNEL requires MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_TUNNEL */
#if EFSYS_OPT_FW_SUBVARIANT_AWARE
/* Advertise that the driver is firmware subvariant aware */
# if !(EFSYS_OPT_MEDFORD2)
# error "FW_SUBVARIANT_AWARE requires MEDFORD2"
# endif
#endif
#endif /* _SYS_EFX_CHECK_H */