/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*
*/
#ifndef __FSL_QMAN_H
#define __FSL_QMAN_H
#ifdef __cplusplus
extern "C" {
#endif
#include <dpaa_rbtree.h>
#include <rte_eventdev.h>
/* FQ lookups (turn this on for 64bit user-space) */
#if (__WORDSIZE == 64)
#define CONFIG_FSL_QMAN_FQ_LOOKUP
/* if FQ lookups are supported, this controls the number of initialised,
* s/w-consumed FQs that can be supported at any one time.
*/
#define CONFIG_FSL_QMAN_FQ_LOOKUP_MAX (32 * 1024)
#endif
/* Last updated for v00.800 of the BG */
/* Hardware constants */
#define QM_CHANNEL_SWPORTAL0 0
#define QMAN_CHANNEL_POOL1 0x21
#define QMAN_CHANNEL_CAAM 0x80
#define QMAN_CHANNEL_PME 0xa0
#define QMAN_CHANNEL_POOL1_REV3 0x401
#define QMAN_CHANNEL_CAAM_REV3 0x840
#define QMAN_CHANNEL_PME_REV3 0x860
extern u16 qm_channel_pool1;
extern u16 qm_channel_caam;
extern u16 qm_channel_pme;
enum qm_dc_portal {
qm_dc_portal_fman0 = 0,
qm_dc_portal_fman1 = 1,
qm_dc_portal_caam = 2,
qm_dc_portal_pme = 3
};
__rte_internal
u16 dpaa_get_qm_channel_caam(void);
__rte_internal
u16 dpaa_get_qm_channel_pool(void);
/* Portal processing (interrupt) sources */
#define QM_PIRQ_CCSCI 0x00200000 /* CEETM Congestion State Change */
#define QM_PIRQ_CSCI 0x00100000 /* Congestion State Change */
#define QM_PIRQ_EQCI 0x00080000 /* Enqueue Command Committed */
#define QM_PIRQ_EQRI 0x00040000 /* EQCR Ring (below threshold) */
#define QM_PIRQ_DQRI 0x00020000 /* DQRR Ring (non-empty) */
#define QM_PIRQ_MRI 0x00010000 /* MR Ring (non-empty) */
/*
* This mask contains all the interrupt sources that need handling except DQRI,
* ie. that if present should trigger slow-path processing.
*/
#define QM_PIRQ_SLOW (QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \
QM_PIRQ_MRI | QM_PIRQ_CCSCI)
/* For qman_static_dequeue_*** APIs */
#define QM_SDQCR_CHANNELS_POOL_MASK 0x00007fff
/* for n in [1,15] */
#define QM_SDQCR_CHANNELS_POOL(n) (0x00008000 >> (n))
/* for conversion from n of qm_channel */
static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel)
{
return QM_SDQCR_CHANNELS_POOL(channel + 1 - dpaa_get_qm_channel_pool());
}
/* For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use
* NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use
* FQID(n) to fill in the frame queue ID.
*/
#define QM_VDQCR_PRECEDENCE_VDQCR 0x0
#define QM_VDQCR_PRECEDENCE_SDQCR 0x80000000
#define QM_VDQCR_EXACT 0x40000000
#define QM_VDQCR_NUMFRAMES_MASK 0x3f000000
#define QM_VDQCR_NUMFRAMES_SET(n) (((n) & 0x3f) << 24)
#define QM_VDQCR_NUMFRAMES_GET(n) (((n) >> 24) & 0x3f)
#define QM_VDQCR_NUMFRAMES_TILLEMPTY QM_VDQCR_NUMFRAMES_SET(0)
/* --- QMan data structures (and associated constants) --- */
/* Represents s/w corenet portal mapped data structures */
struct qm_eqcr_entry; /* EQCR (EnQueue Command Ring) entries */
struct qm_dqrr_entry; /* DQRR (DeQueue Response Ring) entries */
struct qm_mr_entry; /* MR (Message Ring) entries */
struct qm_mc_command; /* MC (Management Command) command */
struct qm_mc_result; /* MC result */
#define QM_FD_FORMAT_SG 0x4
#define QM_FD_FORMAT_LONG 0x2
#define QM_FD_FORMAT_COMPOUND 0x1
enum qm_fd_format {
/*
* 'contig' implies a contiguous buffer, whereas 'sg' implies a
* scatter-gather table. 'big' implies a 29-bit length with no offset
* field, otherwise length is 20-bit and offset is 9-bit. 'compound'
* implies a s/g-like table, where each entry itself represents a frame
* (contiguous or scatter-gather) and the 29-bit "length" is
* interpreted purely for congestion calculations, ie. a "congestion
* weight".
*/
qm_fd_contig = 0,
qm_fd_contig_big = QM_FD_FORMAT_LONG,
qm_fd_sg = QM_FD_FORMAT_SG,
qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG,
qm_fd_compound = QM_FD_FORMAT_COMPOUND
};
/* Capitalised versions are un-typed but can be used in static expressions */
#define QM_FD_CONTIG 0
#define QM_FD_CONTIG_BIG QM_FD_FORMAT_LONG
#define QM_FD_SG QM_FD_FORMAT_SG
#define QM_FD_SG_BIG (QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG)
#define QM_FD_COMPOUND QM_FD_FORMAT_COMPOUND
/* "Frame Descriptor (FD)" */
struct qm_fd {
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 dd:2; /* dynamic debug */
u8 liodn_offset:6;
u8 bpid:8; /* Buffer Pool ID */
u8 eliodn_offset:4;
u8 __reserved:4;
u8 addr_hi; /* high 8-bits of 40-bit address */
u32 addr_lo; /* low 32-bits of 40-bit address */
#else
u8 liodn_offset:6;
u8 dd:2; /* dynamic debug */
u8 bpid:8; /* Buffer Pool ID */
u8 __reserved:4;
u8 eliodn_offset:4;
u8 addr_hi; /* high 8-bits of 40-bit address */
u32 addr_lo; /* low 32-bits of 40-bit address */
#endif
};
struct {
u64 __notaddress:24;
/* More efficient address accessor */
u64 addr:40;
};
u64 opaque_addr;
};
/* The 'format' field indicates the interpretation of the remaining 29
* bits of the 32-bit word. For packing reasons, it is duplicated in the
* other union elements. Note, union'd structs are difficult to use with
* static initialisation under gcc, in which case use the "opaque" form
* with one of the macros.
*/
union {
/* For easier/faster copying of this part of the fd (eg. from a
* DQRR entry to an EQCR entry) copy 'opaque'
*/
u32 opaque;
/* If 'format' is _contig or _sg, 20b length and 9b offset */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
enum qm_fd_format format:3;
u16 offset:9;
u32 length20:20;
#else
u32 length20:20;
u16 offset:9;
enum qm_fd_format format:3;
#endif
};
/* If 'format' is _contig_big or _sg_big, 29b length */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
enum qm_fd_format _format1:3;
u32 length29:29;
#else
u32 length29:29;
enum qm_fd_format _format1:3;
#endif
};
/* If 'format' is _compound, 29b "congestion weight" */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
enum qm_fd_format _format2:3;
u32 cong_weight:29;
#else
u32 cong_weight:29;
enum qm_fd_format _format2:3;
#endif
};
};
union {
u32 cmd;
u32 status;
};
} __rte_aligned(8);
#define QM_FD_DD_NULL 0x00
#define QM_FD_PID_MASK 0x3f
static inline u64 qm_fd_addr_get64(const struct qm_fd *fd)
{
return fd->addr;
}
static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd)
{
return (dma_addr_t)fd->addr;
}
/* Macro, so we compile better if 'v' isn't always 64-bit */
#define qm_fd_addr_set64(fd, v) \
do { \
struct qm_fd *__fd931 = (fd); \
__fd931->addr = v; \
} while (0)
/* Scatter/Gather table entry */
struct qm_sg_entry {
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 __reserved1[3];
u8 addr_hi; /* high 8-bits of 40-bit address */
u32 addr_lo; /* low 32-bits of 40-bit address */
#else
u32 addr_lo; /* low 32-bits of 40-bit address */
u8 addr_hi; /* high 8-bits of 40-bit address */
u8 __reserved1[3];
#endif
};
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u64 __notaddress:24;
u64 addr:40;
#else
u64 addr:40;
u64 __notaddress:24;
#endif
};
u64 opaque;
};
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u32 extension:1; /* Extension bit */
u32 final:1; /* Final bit */
u32 length:30;
#else
u32 length:30;
u32 final:1; /* Final bit */
u32 extension:1; /* Extension bit */
#endif
};
u32 val;
};
u8 __reserved2;
u8 bpid;
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 __reserved3:3;
u16 offset:13;
#else
u16 offset:13;
u16 __reserved3:3;
#endif
};
u16 val_off;
};
} __packed;
static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg)
{
return sg->addr;
}
static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg)
{
return (dma_addr_t)sg->addr;
}
/* Macro, so we compile better if 'v' isn't always 64-bit */
#define qm_sg_entry_set64(sg, v) \
do { \
struct qm_sg_entry *__sg931 = (sg); \
__sg931->addr = v; \
} while (0)
/* See 1.5.8.1: "Enqueue Command" */
struct __rte_aligned(8) qm_eqcr_entry {
u8 __dont_write_directly__verb;
u8 dca;
u16 seqnum;
u32 orp; /* 24-bit */
u32 fqid; /* 24-bit */
u32 tag;
struct qm_fd fd; /* this has alignment 8 */
u8 __reserved3[32];
} __packed;
/* "Frame Dequeue Response" */
struct __rte_aligned(8) qm_dqrr_entry {
u8 verb;
u8 stat;
u16 seqnum; /* 15-bit */
u8 tok;
u8 __reserved2[3];
u32 fqid; /* 24-bit */
u32 contextB;
struct qm_fd fd; /* this has alignment 8 */
u8 __reserved4[32];
};
#define QM_DQRR_VERB_VBIT 0x80
#define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */
#define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */
#define QM_DQRR_STAT_FQ_EMPTY 0x80 /* FQ empty */
#define QM_DQRR_STAT_FQ_HELDACTIVE 0x40 /* FQ held active */
#define QM_DQRR_STAT_FQ_FORCEELIGIBLE 0x20 /* FQ was force-eligible'd */
#define QM_DQRR_STAT_FD_VALID 0x10 /* has a non-NULL FD */
#define QM_DQRR_STAT_UNSCHEDULED 0x02 /* Unscheduled dequeue */
#define QM_DQRR_STAT_DQCR_EXPIRED 0x01 /* VDQCR or PDQCR expired*/
/* "ERN Message Response" */
/* "FQ State Change Notification" */
struct qm_mr_entry {
union {
struct {
u8 verb;
u8 dca;
u16 seqnum;
u8 rc; /* Rejection Code */
u32 orp:24;
u32 fqid; /* 24-bit */
u32 tag;
struct qm_fd fd; /* this has alignment 8 */
} __packed __rte_aligned(8) ern;
struct {
u8 verb;
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 colour:2; /* See QM_MR_DCERN_COLOUR_* */
u8 __reserved1:4;
enum qm_dc_portal portal:2;
#else
enum qm_dc_portal portal:3;
u8 __reserved1:3;
u8 colour:2; /* See QM_MR_DCERN_COLOUR_* */
#endif
u16 __reserved2;
u8 rc; /* Rejection Code */
u32 __reserved3:24;
u32 fqid; /* 24-bit */
u32 tag;
struct qm_fd fd; /* this has alignment 8 */
} __packed __rte_aligned(8) dcern;
struct {
u8 verb;
u8 fqs; /* Frame Queue Status */
u8 __reserved1[6];
u32 fqid; /* 24-bit */
u32 contextB;
u8 __reserved2[16];
} __packed __rte_aligned(8) fq; /* FQRN/FQRNI/FQRL/FQPN */
};
u8 __reserved2[32];
} __packed __rte_aligned(8);
#define QM_MR_VERB_VBIT 0x80
/*
* ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb
* which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished
* from the other MR types by noting if the 0x20 bit is unset.
*/
#define QM_MR_VERB_TYPE_MASK 0x27
#define QM_MR_VERB_DC_ERN 0x20
#define QM_MR_VERB_FQRN 0x21
#define QM_MR_VERB_FQRNI 0x22
#define QM_MR_VERB_FQRL 0x23
#define QM_MR_VERB_FQPN 0x24
#define QM_MR_RC_MASK 0xf0 /* contains one of; */
#define QM_MR_RC_CGR_TAILDROP 0x00
#define QM_MR_RC_WRED 0x10
#define QM_MR_RC_ERROR 0x20
#define QM_MR_RC_ORPWINDOW_EARLY 0x30
#define QM_MR_RC_ORPWINDOW_LATE 0x40
#define QM_MR_RC_FQ_TAILDROP 0x50
#define QM_MR_RC_ORPWINDOW_RETIRED 0x60
#define QM_MR_RC_ORP_ZERO 0x70
#define QM_MR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */
#define QM_MR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */
#define QM_MR_DCERN_COLOUR_GREEN 0x00
#define QM_MR_DCERN_COLOUR_YELLOW 0x01
#define QM_MR_DCERN_COLOUR_RED 0x02
#define QM_MR_DCERN_COLOUR_OVERRIDE 0x03
/*
* An identical structure of FQD fields is present in the "Init FQ" command and
* the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type.
* Within that, the 'stashing' and 'taildrop' pieces are also factored out, the
* latter has two inlines to assist with converting to/from the mant+exp
* representation.
*/
struct qm_fqd_stashing {
/* See QM_STASHING_EXCL_<...> */
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 exclusive;
u8 __reserved1:2;
/* Numbers of cachelines */
u8 annotation_cl:2;
u8 data_cl:2;
u8 context_cl:2;
#else
u8 context_cl:2;
u8 data_cl:2;
u8 annotation_cl:2;
u8 __reserved1:2;
u8 exclusive;
#endif
} __packed;
struct qm_fqd_taildrop {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 __reserved1:3;
u16 mant:8;
u16 exp:5;
#else
u16 exp:5;
u16 mant:8;
u16 __reserved1:3;
#endif
} __packed;
struct qm_fqd_oac {
/* "Overhead Accounting Control", see QM_OAC_<...> */
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 oac:2; /* "Overhead Accounting Control" */
u8 __reserved1:6;
#else
u8 __reserved1:6;
u8 oac:2; /* "Overhead Accounting Control" */
#endif
/* Two's-complement value (-128 to +127) */
signed char oal; /* "Overhead Accounting Length" */
} __packed;
struct qm_fqd {
union {
u8 orpc;
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 __reserved1:2;
u8 orprws:3;
u8 oa:1;
u8 olws:2;
#else
u8 olws:2;
u8 oa:1;
u8 orprws:3;
u8 __reserved1:2;
#endif
} __packed;
};
u8 cgid;
u16 fq_ctrl; /* See QM_FQCTRL_<...> */
union {
u16 dest_wq;
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 channel:13; /* qm_channel */
u16 wq:3;
#else
u16 wq:3;
u16 channel:13; /* qm_channel */
#endif
} __packed dest;
};
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 __reserved2:1;
u16 ics_cred:15;
#else
u16 __reserved2:1;
u16 ics_cred:15;
#endif
/*
* For "Initialize Frame Queue" commands, the write-enable mask
* determines whether 'td' or 'oac_init' is observed. For query
* commands, this field is always 'td', and 'oac_query' (below) reflects
* the Overhead ACcounting values.
*/
union {
uint16_t opaque_td;
struct qm_fqd_taildrop td;
struct qm_fqd_oac oac_init;
};
u32 context_b;
union {
/* Treat it as 64-bit opaque */
u64 opaque;
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u32 hi;
u32 lo;
#else
u32 lo;
u32 hi;
#endif
};
/* Treat it as s/w portal stashing config */
/* see "FQD Context_A field used for [...]" */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
struct qm_fqd_stashing stashing;
/*
* 48-bit address of FQ context to
* stash, must be cacheline-aligned
*/
u16 context_hi;
u32 context_lo;
#else
u32 context_lo;
u16 context_hi;
struct qm_fqd_stashing stashing;
#endif
} __packed;
} context_a;
struct qm_fqd_oac oac_query;
} __packed;
/* 64-bit converters for context_hi/lo */
static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd)
{
return ((u64)fqd->context_a.context_hi << 32) |
(u64)fqd->context_a.context_lo;
}
static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd)
{
return (dma_addr_t)qm_fqd_stashing_get64(fqd);
}
static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd)
{
return ((u64)fqd->context_a.hi << 32) |
(u64)fqd->context_a.lo;
}
static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr)
{
fqd->context_a.context_hi = upper_32_bits(addr);
fqd->context_a.context_lo = lower_32_bits(addr);
}
static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr)
{
fqd->context_a.hi = upper_32_bits(addr);
fqd->context_a.lo = lower_32_bits(addr);
}
/* convert a threshold value into mant+exp representation */
static inline int qm_fqd_taildrop_set(struct qm_fqd_taildrop *td, u32 val,
int roundup)
{
u32 e = 0;
int oddbit = 0;
if (val > 0xe0000000)
return -ERANGE;
while (val > 0xff) {
oddbit = val & 1;
val >>= 1;
e++;
if (roundup && oddbit)
val++;
}
td->exp = e;
td->mant = val;
return 0;
}
/* and the other direction */
static inline u32 qm_fqd_taildrop_get(const struct qm_fqd_taildrop *td)
{
return (u32)td->mant << td->exp;
}
/* See "Frame Queue Descriptor (FQD)" */
/* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */
#define QM_FQCTRL_MASK 0x07ff /* 'fq_ctrl' flags; */
#define QM_FQCTRL_CGE 0x0400 /* Congestion Group Enable */
#define QM_FQCTRL_TDE 0x0200 /* Tail-Drop Enable */
#define QM_FQCTRL_ORP 0x0100 /* ORP Enable */
#define QM_FQCTRL_CTXASTASHING 0x0080 /* Context-A stashing */
#define QM_FQCTRL_CPCSTASH 0x0040 /* CPC Stash Enable */
#define QM_FQCTRL_FORCESFDR 0x0008 /* High-priority SFDRs */
#define QM_FQCTRL_AVOIDBLOCK 0x0004 /* Don't block active */
#define QM_FQCTRL_HOLDACTIVE 0x0002 /* Hold active in portal */
#define QM_FQCTRL_PREFERINCACHE 0x0001 /* Aggressively cache FQD */
#define QM_FQCTRL_LOCKINCACHE QM_FQCTRL_PREFERINCACHE /* older naming */
/* See "FQD Context_A field used for [...] */
/* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */
#define QM_STASHING_EXCL_ANNOTATION 0x04
#define QM_STASHING_EXCL_DATA 0x02
#define QM_STASHING_EXCL_CTX 0x01
/* See "Intra Class Scheduling" */
/* FQD field 'OAC' (Overhead ACcounting) uses these constants */
#define QM_OAC_ICS 0x2 /* Accounting for Intra-Class Scheduling */
#define QM_OAC_CG 0x1 /* Accounting for Congestion Groups */
/*
* This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields
* and associated commands/responses. The WRED parameters are calculated from
* these fields as follows;
* MaxTH = MA * (2 ^ Mn)
* Slope = SA / (2 ^ Sn)
* MaxP = 4 * (Pn + 1)
*/
struct qm_cgr_wr_parm {
union {
u32 word;
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u32 MA:8;
u32 Mn:5;
u32 SA:7; /* must be between 64-127 */
u32 Sn:6;
u32 Pn:6;
#else
u32 Pn:6;
u32 Sn:6;
u32 SA:7; /* must be between 64-127 */
u32 Mn:5;
u32 MA:8;
#endif
} __packed;
};
} __packed;
/*
* This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding
* management commands, this is padded to a 16-bit structure field, so that's
* how we represent it here. The congestion state threshold is calculated from
* these fields as follows;
* CS threshold = TA * (2 ^ Tn)
*/
struct qm_cgr_cs_thres {
union {
u16 hword;
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 __reserved:3;
u16 TA:8;
u16 Tn:5;
#else
u16 Tn:5;
u16 TA:8;
u16 __reserved:3;
#endif
} __packed;
};
} __packed;
/*
* This identical structure of CGR fields is present in the "Init/Modify CGR"
* commands and the "Query CGR" result. It's suctioned out here into its own
* struct.
*/
struct __qm_mc_cgr {
struct qm_cgr_wr_parm wr_parm_g;
struct qm_cgr_wr_parm wr_parm_y;
struct qm_cgr_wr_parm wr_parm_r;
u8 wr_en_g; /* boolean, use QM_CGR_EN */
u8 wr_en_y; /* boolean, use QM_CGR_EN */
u8 wr_en_r; /* boolean, use QM_CGR_EN */
u8 cscn_en; /* boolean, use QM_CGR_EN */
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 cscn_targ_upd_ctrl; /* use QM_CSCN_TARG_UDP_ */
u16 cscn_targ_dcp_low; /* CSCN_TARG_DCP low-16bits */
#else
u16 cscn_targ_dcp_low; /* CSCN_TARG_DCP low-16bits */
u16 cscn_targ_upd_ctrl; /* use QM_CSCN_TARG_UDP_ */
#endif
};
u32 cscn_targ; /* use QM_CGR_TARG_* */
};
u8 cstd_en; /* boolean, use QM_CGR_EN */
u8 cs; /* boolean, only used in query response */
union {
struct qm_cgr_cs_thres cs_thres;
/* use qm_cgr_cs_thres_set64() */
u16 __cs_thres;
};
u8 mode; /* QMAN_CGR_MODE_FRAME not supported in rev1.0 */
} __packed;
#define QM_CGR_EN 0x01 /* For wr_en_*, cscn_en, cstd_en */
#define QM_CGR_TARG_UDP_CTRL_WRITE_BIT 0x8000 /* value written to portal bit*/
#define QM_CGR_TARG_UDP_CTRL_DCP 0x4000 /* 0: SWP, 1: DCP */
#define QM_CGR_TARG_PORTAL(n) (0x80000000 >> (n)) /* s/w portal, 0-9 */
#define QM_CGR_TARG_FMAN0 0x00200000 /* direct-connect portal: fman0 */
#define QM_CGR_TARG_FMAN1 0x00100000 /* : fman1 */
/* Convert CGR thresholds to/from "cs_thres" format */
static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th)
{
return (u64)th->TA << th->Tn;
}
static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val,
int roundup)
{
u32 e = 0;
int oddbit = 0;
while (val > 0xff) {
oddbit = val & 1;
val >>= 1;
e++;
if (roundup && oddbit)
val++;
}
th->Tn = e;
th->TA = val;
return 0;
}
/* See 1.5.8.5.1: "Initialize FQ" */
/* See 1.5.8.5.2: "Query FQ" */
/* See 1.5.8.5.3: "Query FQ Non-Programmable Fields" */
/* See 1.5.8.5.4: "Alter FQ State Commands " */
/* See 1.5.8.6.1: "Initialize/Modify CGR" */
/* See 1.5.8.6.2: "CGR Test Write" */
/* See 1.5.8.6.3: "Query CGR" */
/* See 1.5.8.6.4: "Query Congestion Group State" */
struct qm_mcc_initfq {
u8 __reserved1;
u16 we_mask; /* Write Enable Mask */
u32 fqid; /* 24-bit */
u16 count; /* Initialises 'count+1' FQDs */
struct qm_fqd fqd; /* the FQD fields go here */
u8 __reserved3[30];
} __packed;
struct qm_mcc_queryfq {
u8 __reserved1[3];
u32 fqid; /* 24-bit */
u8 __reserved2[56];
} __packed;
struct qm_mcc_queryfq_np {
u8 __reserved1[3];
u32 fqid; /* 24-bit */
u8 __reserved2[56];
} __packed;
struct qm_mcc_alterfq {
u8 __reserved1[3];
u32 fqid; /* 24-bit */
u8 __reserved2;
u8 count; /* number of consecutive FQID */
u8 __reserved3[10];
u32 context_b; /* frame queue context b */
u8 __reserved4[40];
} __packed;
struct qm_mcc_initcgr {
u8 __reserved1;
u16 we_mask; /* Write Enable Mask */
struct __qm_mc_cgr cgr; /* CGR fields */
u8 __reserved2[2];
u8 cgid;
u8 __reserved4[32];
} __packed;
struct qm_mcc_cgrtestwrite {
u8 __reserved1[2];
u8 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
u32 i_bcnt_lo; /* low 32-bits of 40-bit */
u8 __reserved2[23];
u8 cgid;
u8 __reserved3[32];
} __packed;
struct qm_mcc_querycgr {
u8 __reserved1[30];
u8 cgid;
u8 __reserved2[32];
} __packed;
struct qm_mcc_querycongestion {
u8 __reserved[63];
} __packed;
struct qm_mcc_querywq {
u8 __reserved;
/* select channel if verb != QUERYWQ_DEDICATED */
union {
u16 channel_wq; /* ignores wq (3 lsbits) */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 id:13; /* qm_channel */
u16 __reserved1:3;
#else
u16 __reserved1:3;
u16 id:13; /* qm_channel */
#endif
} __packed channel;
};
u8 __reserved2[60];
} __packed;
struct qm_mc_command {
u8 __dont_write_directly__verb;
union {
struct qm_mcc_initfq initfq;
struct qm_mcc_queryfq queryfq;
struct qm_mcc_queryfq_np queryfq_np;
struct qm_mcc_alterfq alterfq;
struct qm_mcc_initcgr initcgr;
struct qm_mcc_cgrtestwrite cgrtestwrite;
struct qm_mcc_querycgr querycgr;
struct qm_mcc_querycongestion querycongestion;
struct qm_mcc_querywq querywq;
};
} __packed;
/* INITFQ-specific flags */
#define QM_INITFQ_WE_MASK 0x01ff /* 'Write Enable' flags; */
#define QM_INITFQ_WE_OAC 0x0100
#define QM_INITFQ_WE_ORPC 0x0080
#define QM_INITFQ_WE_CGID 0x0040
#define QM_INITFQ_WE_FQCTRL 0x0020
#define QM_INITFQ_WE_DESTWQ 0x0010
#define QM_INITFQ_WE_ICSCRED 0x0008
#define QM_INITFQ_WE_TDTHRESH 0x0004
#define QM_INITFQ_WE_CONTEXTB 0x0002
#define QM_INITFQ_WE_CONTEXTA 0x0001
/* INITCGR/MODIFYCGR-specific flags */
#define QM_CGR_WE_MASK 0x07ff /* 'Write Enable Mask'; */
#define QM_CGR_WE_WR_PARM_G 0x0400
#define QM_CGR_WE_WR_PARM_Y 0x0200
#define QM_CGR_WE_WR_PARM_R 0x0100
#define QM_CGR_WE_WR_EN_G 0x0080
#define QM_CGR_WE_WR_EN_Y 0x0040
#define QM_CGR_WE_WR_EN_R 0x0020
#define QM_CGR_WE_CSCN_EN 0x0010
#define QM_CGR_WE_CSCN_TARG 0x0008
#define QM_CGR_WE_CSTD_EN 0x0004
#define QM_CGR_WE_CS_THRES 0x0002
#define QM_CGR_WE_MODE 0x0001
struct qm_mcr_initfq {
u8 __reserved1[62];
} __packed;
struct qm_mcr_queryfq {
u8 __reserved1[8];
struct qm_fqd fqd; /* the FQD fields are here */
u8 __reserved2[30];
} __packed;
struct qm_mcr_queryfq_np {
u8 __reserved1;
u8 state; /* QM_MCR_NP_STATE_*** */
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u8 __reserved2;
u32 fqd_link:24;
u16 __reserved3:2;
u16 odp_seq:14;
u16 __reserved4:2;
u16 orp_nesn:14;
u16 __reserved5:1;
u16 orp_ea_hseq:15;
u16 __reserved6:1;
u16 orp_ea_tseq:15;
u8 __reserved7;
u32 orp_ea_hptr:24;
u8 __reserved8;
u32 orp_ea_tptr:24;
u8 __reserved9;
u32 pfdr_hptr:24;
u8 __reserved10;
u32 pfdr_tptr:24;
u8 __reserved11[5];
u8 __reserved12:7;
u8 is:1;
u16 ics_surp;
u32 byte_cnt;
u8 __reserved13;
u32 frm_cnt:24;
u32 __reserved14;
u16 ra1_sfdr; /* QM_MCR_NP_RA1_*** */
u16 ra2_sfdr; /* QM_MCR_NP_RA2_*** */
u16 __reserved15;
u16 od1_sfdr; /* QM_MCR_NP_OD1_*** */
u16 od2_sfdr; /* QM_MCR_NP_OD2_*** */
u16 od3_sfdr; /* QM_MCR_NP_OD3_*** */
#else
u8 __reserved2;
u32 fqd_link:24;
u16 odp_seq:14;
u16 __reserved3:2;
u16 orp_nesn:14;
u16 __reserved4:2;
u16 orp_ea_hseq:15;
u16 __reserved5:1;
u16 orp_ea_tseq:15;
u16 __reserved6:1;
u8 __reserved7;
u32 orp_ea_hptr:24;
u8 __reserved8;
u32 orp_ea_tptr:24;
u8 __reserved9;
u32 pfdr_hptr:24;
u8 __reserved10;
u32 pfdr_tptr:24;
u8 __reserved11[5];
u8 is:1;
u8 __reserved12:7;
u16 ics_surp;
u32 byte_cnt;
u8 __reserved13;
u32 frm_cnt:24;
u32 __reserved14;
u16 ra1_sfdr; /* QM_MCR_NP_RA1_*** */
u16 ra2_sfdr; /* QM_MCR_NP_RA2_*** */
u16 __reserved15;
u16 od1_sfdr; /* QM_MCR_NP_OD1_*** */
u16 od2_sfdr; /* QM_MCR_NP_OD2_*** */
u16 od3_sfdr; /* QM_MCR_NP_OD3_*** */
#endif
} __packed;
struct qm_mcr_alterfq {
u8 fqs; /* Frame Queue Status */
u8 __reserved1[61];
} __packed;
struct qm_mcr_initcgr {
u8 __reserved1[62];
} __packed;
struct qm_mcr_cgrtestwrite {
u16 __reserved1;
struct __qm_mc_cgr cgr; /* CGR fields */
u8 __reserved2[3];
u32 __reserved3:24;
u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
u32 i_bcnt_lo; /* low 32-bits of 40-bit */
u32 __reserved4:24;
u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
u32 a_bcnt_lo; /* low 32-bits of 40-bit */
u16 lgt; /* Last Group Tick */
u16 wr_prob_g;
u16 wr_prob_y;
u16 wr_prob_r;
u8 __reserved5[8];
} __packed;
struct qm_mcr_querycgr {
u16 __reserved1;
struct __qm_mc_cgr cgr; /* CGR fields */
u8 __reserved2[3];
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u32 __reserved3:24;
u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
u32 i_bcnt_lo; /* low 32-bits of 40-bit */
#else
u32 i_bcnt_lo; /* low 32-bits of 40-bit */
u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
u32 __reserved3:24;
#endif
};
u64 i_bcnt;
};
union {
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u32 __reserved4:24;
u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
u32 a_bcnt_lo; /* low 32-bits of 40-bit */
#else
u32 a_bcnt_lo; /* low 32-bits of 40-bit */
u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
u32 __reserved4:24;
#endif
};
u64 a_bcnt;
};
union {
u32 cscn_targ_swp[4];
u8 __reserved5[16];
};
} __packed;
struct __qm_mcr_querycongestion {
u32 state[8];
};
struct qm_mcr_querycongestion {
u8 __reserved[30];
/* Access this struct using QM_MCR_QUERYCONGESTION() */
struct __qm_mcr_querycongestion state;
} __packed;
struct qm_mcr_querywq {
union {
u16 channel_wq; /* ignores wq (3 lsbits) */
struct {
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
u16 id:13; /* qm_channel */
u16 __reserved:3;
#else
u16 __reserved:3;
u16 id:13; /* qm_channel */
#endif
} __packed channel;
};
u8 __reserved[28];
u32 wq_len[8];
} __packed;
struct qm_mc_result {
u8 verb;
u8 result;
union {
struct qm_mcr_initfq initfq;
struct qm_mcr_queryfq queryfq;
struct qm_mcr_queryfq_np queryfq_np;
struct qm_mcr_alterfq alterfq;
struct qm_mcr_initcgr initcgr;
struct qm_mcr_cgrtestwrite cgrtestwrite;
struct qm_mcr_querycgr querycgr;
struct qm_mcr_querycongestion querycongestion;
struct qm_mcr_querywq querywq;
};
} __packed;
#define QM_MCR_VERB_RRID 0x80
#define QM_MCR_VERB_MASK QM_MCC_VERB_MASK
#define QM_MCR_VERB_INITFQ_PARKED QM_MCC_VERB_INITFQ_PARKED
#define QM_MCR_VERB_INITFQ_SCHED QM_MCC_VERB_INITFQ_SCHED
#define QM_MCR_VERB_QUERYFQ QM_MCC_VERB_QUERYFQ
#define QM_MCR_VERB_QUERYFQ_NP QM_MCC_VERB_QUERYFQ_NP
#define QM_MCR_VERB_QUERYWQ QM_MCC_VERB_QUERYWQ
#define QM_MCR_VERB_QUERYWQ_DEDICATED QM_MCC_VERB_QUERYWQ_DEDICATED
#define QM_MCR_VERB_ALTER_SCHED QM_MCC_VERB_ALTER_SCHED
#define QM_MCR_VERB_ALTER_FE QM_MCC_VERB_ALTER_FE
#define QM_MCR_VERB_ALTER_RETIRE QM_MCC_VERB_ALTER_RETIRE
#define QM_MCR_VERB_ALTER_OOS QM_MCC_VERB_ALTER_OOS
#define QM_MCR_RESULT_NULL 0x00
#define QM_MCR_RESULT_OK 0xf0
#define QM_MCR_RESULT_ERR_FQID 0xf1
#define QM_MCR_RESULT_ERR_FQSTATE 0xf2
#define QM_MCR_RESULT_ERR_NOTEMPTY 0xf3 /* OOS fails if FQ is !empty */
#define QM_MCR_RESULT_ERR_BADCHANNEL 0xf4
#define QM_MCR_RESULT_PENDING 0xf8
#define QM_MCR_RESULT_ERR_BADCOMMAND 0xff
#define QM_MCR_NP_STATE_FE 0x10
#define QM_MCR_NP_STATE_R 0x08
#define QM_MCR_NP_STATE_MASK 0x07 /* Reads FQD::STATE; */
#define QM_MCR_NP_STATE_OOS 0x00
#define QM_MCR_NP_STATE_RETIRED 0x01
#define QM_MCR_NP_STATE_TEN_SCHED 0x02
#define QM_MCR_NP_STATE_TRU_SCHED 0x03
#define QM_MCR_NP_STATE_PARKED 0x04
#define QM_MCR_NP_STATE_ACTIVE 0x05
#define QM_MCR_NP_PTR_MASK 0x07ff /* for RA[12] & OD[123] */
#define QM_MCR_NP_RA1_NRA(v) (((v) >> 14) & 0x3) /* FQD::NRA */
#define QM_MCR_NP_RA2_IT(v) (((v) >> 14) & 0x1) /* FQD::IT */
#define QM_MCR_NP_OD1_NOD(v) (((v) >> 14) & 0x3) /* FQD::NOD */
#define QM_MCR_NP_OD3_NPC(v) (((v) >> 14) & 0x3) /* FQD::NPC */
#define QM_MCR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */
#define QM_MCR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */
/* This extracts the state for congestion group 'n' from a query response.
* Eg.
* u8 cgr = [...];
* struct qm_mc_result *res = [...];
* printf("congestion group %d congestion state: %d\n", cgr,
* QM_MCR_QUERYCONGESTION(&res->querycongestion.state, cgr));
*/
#define __CGR_WORD(num) (num >> 5)
#define __CGR_SHIFT(num) (num & 0x1f)
#define __CGR_NUM (sizeof(struct __qm_mcr_querycongestion) << 3)
static inline int QM_MCR_QUERYCONGESTION(struct __qm_mcr_querycongestion *p,
u8 cgr)
{
return p->state[__CGR_WORD(cgr)] & (0x80000000 >> __CGR_SHIFT(cgr));
}
/* Portal and Frame Queues */
/* Represents a managed portal */
struct qman_portal;
/*
* This object type represents QMan frame queue descriptors (FQD), it is
* cacheline-aligned, and initialised by qman_create_fq(). The structure is
* defined further down.
*/
struct qman_fq;
/*
* This object type represents a QMan congestion group, it is defined further
* down.
*/
struct qman_cgr;
/*
* This enum, and the callback type that returns it, are used when handling
* dequeued frames via DQRR. Note that for "null" callbacks registered with the
* portal object (for handling dequeues that do not demux because context_b is
* NULL), the return value *MUST* be qman_cb_dqrr_consume.
*/
enum qman_cb_dqrr_result {
/* DQRR entry can be consumed */
qman_cb_dqrr_consume,
/* Like _consume, but requests parking - FQ must be held-active */
qman_cb_dqrr_park,
/* Does not consume, for DCA mode only. This allows out-of-order
* consumes by explicit calls to qman_dca() and/or the use of implicit
* DCA via EQCR entries.
*/
qman_cb_dqrr_defer,
/*
* Stop processing without consuming this ring entry. Exits the current
* qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within
* an interrupt handler, the callback would typically call
* qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value,
* otherwise the interrupt will reassert immediately.
*/
qman_cb_dqrr_stop,
/* Like qman_cb_dqrr_stop, but consumes the current entry. */
qman_cb_dqrr_consume_stop
};
typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm,
struct qman_fq *fq,
const struct qm_dqrr_entry *dqrr);
typedef enum qman_cb_dqrr_result (*qman_dpdk_cb_dqrr)(void *event,
struct qman_portal *qm,
struct qman_fq *fq,
const struct qm_dqrr_entry *dqrr,
void **bd);
/* This callback type is used when handling buffers in dpdk pull mode */
typedef void (*qman_dpdk_pull_cb_dqrr)(struct qman_fq **fq,
struct qm_dqrr_entry **dqrr,
void **bufs,
int num_bufs);
typedef void (*qman_dpdk_cb_prepare)(struct qm_dqrr_entry *dq, void **bufs);
/*
* This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They
* are always consumed after the callback returns.
*/
typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq,
const struct qm_mr_entry *msg);
/* This callback type is used when handling DCP ERNs */
typedef void (*qman_cb_dc_ern)(struct qman_portal *qm,
const struct qm_mr_entry *msg);
/* This callback function will be used to free mbufs of ERN */
typedef uint16_t (*qman_cb_free_mbuf)(const struct qm_fd *fd);
/*
* s/w-visible states. Ie. tentatively scheduled + truly scheduled + active +
* held-active + held-suspended are just "sched". Things like "retired" will not
* be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until
* then, to indicate it's completing and to gate attempts to retry the retire
* command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's
* technically impossible in the case of enqueue DCAs (which refer to DQRR ring
* index rather than the FQ that ring entry corresponds to), so repeated park
* commands are allowed (if you're silly enough to try) but won't change FQ
* state, and the resulting park notifications move FQs from "sched" to
* "parked".
*/
enum qman_fq_state {
qman_fq_state_oos,
qman_fq_state_parked,
qman_fq_state_sched,
qman_fq_state_retired
};
/*
* Frame queue objects (struct qman_fq) are stored within memory passed to
* qman_create_fq(), as this allows stashing of caller-provided demux callback
* pointers at no extra cost to stashing of (driver-internal) FQ state. If the
* caller wishes to add per-FQ state and have it benefit from dequeue-stashing,
* they should;
*
* (a) extend the qman_fq structure with their state; eg.
*
* // myfq is allocated and driver_fq callbacks filled in;
* struct my_fq {
* struct qman_fq base;
* int an_extra_field;
* [ ... add other fields to be associated with each FQ ...]
* } *myfq = some_my_fq_allocator();
* struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base);
*
* // in a dequeue callback, access extra fields from 'fq' via a cast;
* struct my_fq *myfq = (struct my_fq *)fq;
* do_something_with(myfq->an_extra_field);
* [...]
*
* (b) when and if configuring the FQ for context stashing, specify how ever
* many cachelines are required to stash 'struct my_fq', to accelerate not
* only the QMan driver but the callback as well.
*/
struct qman_fq_cb {
union { /* for dequeued frames */
qman_dpdk_cb_dqrr dqrr_dpdk_cb;
qman_dpdk_pull_cb_dqrr dqrr_dpdk_pull_cb;
qman_cb_dqrr dqrr;
};
qman_dpdk_cb_prepare dqrr_prepare;
qman_cb_mr ern; /* for s/w ERNs */
qman_cb_mr fqs; /* frame-queue state changes*/
};
struct qman_fq {
/* Caller of qman_create_fq() provides these demux callbacks */
struct qman_fq_cb cb;
u32 fqid_le;
u32 fqid;
int q_fd;
u16 ch_id;
int8_t vsp_id;
u8 cgr_groupid;
u8 is_static:4;
u8 qp_initialized:4;
/* DPDK Interface */
void *dpaa_intf;
struct rte_event ev;
/* affined portal in case of static queue */
struct qman_portal *qp;
struct dpaa_bp_info *bp_array;
volatile unsigned long flags;
enum qman_fq_state state;
spinlock_t fqlock;
struct rb_node node;
#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
void **qman_fq_lookup_table;
u32 key;
#endif
u16 nb_desc;
u16 resv;
u64 offloads;
};
/*
* This callback type is used when handling congestion group entry/exit.
* 'congested' is non-zero on congestion-entry, and zero on congestion-exit.
*/
typedef void (*qman_cb_cgr)(struct qman_portal *qm,
struct qman_cgr *cgr, int congested);
struct qman_cgr {
/* Set these prior to qman_create_cgr() */
u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/
qman_cb_cgr cb;
/* These are private to the driver */
u16 chan; /* portal channel this object is created on */
struct list_head node;
};
/* Flags to qman_create_fq() */
#define QMAN_FQ_FLAG_NO_ENQUEUE 0x00000001 /* can't enqueue */
#define QMAN_FQ_FLAG_NO_MODIFY 0x00000002 /* can only enqueue */
#define QMAN_FQ_FLAG_TO_DCPORTAL 0x00000004 /* consumed by CAAM/PME/Fman */
#define QMAN_FQ_FLAG_LOCKED 0x00000008 /* multi-core locking */
#define QMAN_FQ_FLAG_AS_IS 0x00000010 /* query h/w state */
#define QMAN_FQ_FLAG_DYNAMIC_FQID 0x00000020 /* (de)allocate fqid */
/* Flags to qman_destroy_fq() */
#define QMAN_FQ_DESTROY_PARKED 0x00000001 /* FQ can be parked or OOS */
/* Flags from qman_fq_state() */
#define QMAN_FQ_STATE_CHANGING 0x80000000 /* 'state' is changing */
#define QMAN_FQ_STATE_NE 0x40000000 /* retired FQ isn't empty */
#define QMAN_FQ_STATE_ORL 0x20000000 /* retired FQ has ORL */
#define QMAN_FQ_STATE_BLOCKOOS 0xe0000000 /* if any are set, no OOS */
#define QMAN_FQ_STATE_CGR_EN 0x10000000 /* CGR enabled */
#define QMAN_FQ_STATE_VDQCR 0x08000000 /* being volatile dequeued */
/* Flags to qman_init_fq() */
#define QMAN_INITFQ_FLAG_SCHED 0x00000001 /* schedule rather than park */
#define QMAN_INITFQ_FLAG_LOCAL 0x00000004 /* set dest portal */
/* Flags to qman_enqueue(). NB, the strange numbering is to align with hardware,
* bit-wise. (NB: the PME API is sensitive to these precise numberings too, so
* any change here should be audited in PME.)
*/
#define QMAN_ENQUEUE_FLAG_WATCH_CGR 0x00080000 /* watch congestion state */
#define QMAN_ENQUEUE_FLAG_DCA 0x00008000 /* perform enqueue-DCA */
#define QMAN_ENQUEUE_FLAG_DCA_PARK 0x00004000 /* If DCA, requests park */
#define QMAN_ENQUEUE_FLAG_DCA_PTR(p) /* If DCA, p is DQRR entry */ \
(((u32)(p) << 2) & 0x00000f00)
#define QMAN_ENQUEUE_FLAG_C_GREEN 0x00000000 /* choose one C_*** flag */
#define QMAN_ENQUEUE_FLAG_C_YELLOW 0x00000008
#define QMAN_ENQUEUE_FLAG_C_RED 0x00000010
#define QMAN_ENQUEUE_FLAG_C_OVERRIDE 0x00000018
/* For the ORP-specific qman_enqueue_orp() variant;
* - this flag indicates "Not Last In Sequence", ie. all but the final fragment
* of a frame.
*/
#define QMAN_ENQUEUE_FLAG_NLIS 0x01000000
/* - this flag performs no enqueue but fills in an ORP sequence number that
* would otherwise block it (eg. if a frame has been dropped).
*/
#define QMAN_ENQUEUE_FLAG_HOLE 0x02000000
/* - this flag performs no enqueue but advances NESN to the given sequence
* number.
*/
#define QMAN_ENQUEUE_FLAG_NESN 0x04000000
/* Flags to qman_modify_cgr() */
#define QMAN_CGR_FLAG_USE_INIT 0x00000001
#define QMAN_CGR_MODE_FRAME 0x00000001
#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
__rte_internal
void qman_set_fq_lookup_table(void **table);
#endif
/**
* qman_get_portal_index - get portal configuration index
*/
int qman_get_portal_index(void);
__rte_internal
u32 qman_portal_dequeue(struct rte_event ev[], unsigned int poll_limit,
void **bufs);
/**
* qman_irqsource_add - add processing sources to be interrupt-driven
* @bits: bitmask of QM_PIRQ_**I processing sources
*
* Adds processing sources that should be interrupt-driven (rather than
* processed via qman_poll_***() functions). Returns zero for success, or
* -EINVAL if the current CPU is sharing a portal hosted on another CPU.
*/
__rte_internal
int qman_irqsource_add(u32 bits);
/**
* qman_fq_portal_irqsource_add - samilar to qman_irqsource_add, but it
* takes portal (fq specific) as input rather than using the thread affined
* portal.
*/
__rte_internal
int qman_fq_portal_irqsource_add(struct qman_portal *p, u32 bits);
/**
* qman_irqsource_remove - remove processing sources from being interrupt-driven
* @bits: bitmask of QM_PIRQ_**I processing sources
*
* Removes processing sources from being interrupt-driven, so that they will
* instead be processed via qman_poll_***() functions. Returns zero for success,
* or -EINVAL if the current CPU is sharing a portal hosted on another CPU.
*/
__rte_internal
int qman_irqsource_remove(u32 bits);
/**
* qman_fq_portal_irqsource_remove - similar to qman_irqsource_remove, but it
* takes portal (fq specific) as input rather than using the thread affined
* portal.
*/
__rte_internal
int qman_fq_portal_irqsource_remove(struct qman_portal *p, u32 bits);
/**
* qman_affine_channel - return the channel ID of an portal
* @cpu: the cpu whose affine portal is the subject of the query
*
* If @cpu is -1, the affine portal for the current CPU will be used. It is a
* bug to call this function for any value of @cpu (other than -1) that is not a
* member of the cpu mask.
*/
u16 qman_affine_channel(int cpu);
__rte_internal
unsigned int qman_portal_poll_rx(unsigned int poll_limit,
void **bufs, struct qman_portal *q);
/**
* qman_set_vdq - Issue a volatile dequeue command
* @fq: Frame Queue on which the volatile dequeue command is issued
* @num: Number of Frames requested for volatile dequeue
* @vdqcr_flags: QM_VDQCR_EXACT flag to for VDQCR command
*
* This function will issue a volatile dequeue command to the QMAN.
*/
__rte_internal
int qman_set_vdq(struct qman_fq *fq, u16 num, uint32_t vdqcr_flags);
/**
* qman_dequeue - Get the DQRR entry after volatile dequeue command
* @fq: Frame Queue on which the volatile dequeue command is issued
*
* This function will return the DQRR entry after a volatile dequeue command
* is issued. It will keep returning NULL until there is no packet available on
* the DQRR.
*/
__rte_internal
struct qm_dqrr_entry *qman_dequeue(struct qman_fq *fq);
/**
* qman_dqrr_consume - Consume the DQRR entriy after volatile dequeue
* @fq: Frame Queue on which the volatile dequeue command is issued
* @dq: DQRR entry to consume. This is the one which is provided by the
* 'qbman_dequeue' command.
*
* This will consume the DQRR enrey and make it available for next volatile
* dequeue.
*/
__rte_internal
void qman_dqrr_consume(struct qman_fq *fq,
struct qm_dqrr_entry *dq);
/**
* qman_poll_dqrr - process DQRR (fast-path) entries
* @limit: the maximum number of DQRR entries to process
*
* Use of this function requires that DQRR processing not be interrupt-driven.
* Ie. the value returned by qman_irqsource_get() should not include
* QM_PIRQ_DQRI. If the current CPU is sharing a portal hosted on another CPU,
* this function will return -EINVAL, otherwise the return value is >=0 and
* represents the number of DQRR entries processed.
*/
__rte_internal
int qman_poll_dqrr(unsigned int limit);
/**
* qman_poll
*
* Dispatcher logic on a cpu can use this to trigger any maintenance of the
* affine portal. There are two classes of portal processing in question;
* fast-path (which involves demuxing dequeue ring (DQRR) entries and tracking
* enqueue ring (EQCR) consumption), and slow-path (which involves EQCR
* thresholds, congestion state changes, etc). This function does whatever
* processing is not triggered by interrupts.
*
* Note, if DQRR and some slow-path processing are poll-driven (rather than
* interrupt-driven) then this function uses a heuristic to determine how often
* to run slow-path processing - as slow-path processing introduces at least a
* minimum latency each time it is run, whereas fast-path (DQRR) processing is
* close to zero-cost if there is no work to be done.
*/
void qman_poll(void);
/**
* qman_stop_dequeues - Stop h/w dequeuing to the s/w portal
*
* Disables DQRR processing of the portal. This is reference-counted, so
* qman_start_dequeues() must be called as many times as qman_stop_dequeues() to
* truly re-enable dequeuing.
*/
void qman_stop_dequeues(void);
/**
* qman_start_dequeues - (Re)start h/w dequeuing to the s/w portal
*
* Enables DQRR processing of the portal. This is reference-counted, so
* qman_start_dequeues() must be called as many times as qman_stop_dequeues() to
* truly re-enable dequeuing.
*/
void qman_start_dequeues(void);
/**
* qman_static_dequeue_add - Add pool channels to the portal SDQCR
* @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
*
* Adds a set of pool channels to the portal's static dequeue command register
* (SDQCR). The requested pools are limited to those the portal has dequeue
* access to.
*/
__rte_internal
void qman_static_dequeue_add(u32 pools, struct qman_portal *qm);
/**
* qman_static_dequeue_del - Remove pool channels from the portal SDQCR
* @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
*
* Removes a set of pool channels from the portal's static dequeue command
* register (SDQCR). The requested pools are limited to those the portal has
* dequeue access to.
*/
void qman_static_dequeue_del(u32 pools, struct qman_portal *qp);
/**
* qman_static_dequeue_get - return the portal's current SDQCR
*
* Returns the portal's current static dequeue command register (SDQCR). The
* entire register is returned, so if only the currently-enabled pool channels
* are desired, mask the return value with QM_SDQCR_CHANNELS_POOL_MASK.
*/
u32 qman_static_dequeue_get(struct qman_portal *qp);
/**
* qman_dca - Perform a Discrete Consumption Acknowledgment
* @dq: the DQRR entry to be consumed
* @park_request: indicates whether the held-active @fq should be parked
*
* Only allowed in DCA-mode portals, for DQRR entries whose handler callback had
* previously returned 'qman_cb_dqrr_defer'. NB, as with the other APIs, this
* does not take a 'portal' argument but implies the core affine portal from the
* cpu that is currently executing the function. For reasons of locking, this
* function must be called from the same CPU as that which processed the DQRR
* entry in the first place.
*/
void qman_dca(const struct qm_dqrr_entry *dq, int park_request);
/**
* qman_dca_index - Perform a Discrete Consumption Acknowledgment
* @index: the DQRR index to be consumed
* @park_request: indicates whether the held-active @fq should be parked
*
* Only allowed in DCA-mode portals, for DQRR entries whose handler callback had
* previously returned 'qman_cb_dqrr_defer'. NB, as with the other APIs, this
* does not take a 'portal' argument but implies the core affine portal from the
* cpu that is currently executing the function. For reasons of locking, this
* function must be called from the same CPU as that which processed the DQRR
* entry in the first place.
*/
__rte_internal
void qman_dca_index(u8 index, int park_request);
/**
* qman_eqcr_is_empty - Determine if portal's EQCR is empty
*
* For use in situations where a cpu-affine caller needs to determine when all
* enqueues for the local portal have been processed by Qman but can't use the
* QMAN_ENQUEUE_FLAG_WAIT_SYNC flag to do this from the final qman_enqueue().
* The function forces tracking of EQCR consumption (which normally doesn't
* happen until enqueue processing needs to find space to put new enqueue
* commands), and returns zero if the ring still has unprocessed entries,
* non-zero if it is empty.
*/
int qman_eqcr_is_empty(void);
/**
* qman_set_dc_ern - Set the handler for DCP enqueue rejection notifications
* @handler: callback for processing DCP ERNs
* @affine: whether this handler is specific to the locally affine portal
*
* If a hardware block's interface to Qman (ie. its direct-connect portal, or
* DCP) is configured not to receive enqueue rejections, then any enqueues
* through that DCP that are rejected will be sent to a given software portal.
* If @affine is non-zero, then this handler will only be used for DCP ERNs
* received on the portal affine to the current CPU. If multiple CPUs share a
* portal and they all call this function, they will be setting the handler for
* the same portal! If @affine is zero, then this handler will be global to all
* portals handled by this instance of the driver. Only those portals that do
* not have their own affine handler will use the global handler.
*/
void qman_set_dc_ern(qman_cb_dc_ern handler, int affine);
/* FQ management */
/* ------------- */
/**
* qman_create_fq - Allocates a FQ
* @fqid: the index of the FQD to encapsulate, must be "Out of Service"
* @flags: bit-mask of QMAN_FQ_FLAG_*** options
* @fq: memory for storing the 'fq', with callbacks filled in
*
* Creates a frame queue object for the given @fqid, unless the
* QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is
* dynamically allocated (or the function fails if none are available). Once
* created, the caller should not touch the memory at 'fq' except as extended to
* adjacent memory for user-defined fields (see the definition of "struct
* qman_fq" for more info). NO_MODIFY is only intended for enqueuing to
* pre-existing frame-queues that aren't to be otherwise interfered with, it
* prevents all other modifications to the frame queue. The TO_DCPORTAL flag
* causes the driver to honour any contextB modifications requested in the
* qm_init_fq() API, as this indicates the frame queue will be consumed by a
* direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by
* software portals, the contextB field is controlled by the driver and can't be
* modified by the caller. If the AS_IS flag is specified, management commands
* will be used on portal @p to query state for frame queue @fqid and construct
* a frame queue object based on that, rather than assuming/requiring that it be
* Out of Service.
*/
__rte_internal
int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq);
/**
* qman_destroy_fq - Deallocates a FQ
* @fq: the frame queue object to release
* @flags: bit-mask of QMAN_FQ_FREE_*** options
*
* The memory for this frame queue object ('fq' provided in qman_create_fq()) is
* not deallocated but the caller regains ownership, to do with as desired. The
* FQ must be in the 'out-of-service' state unless the QMAN_FQ_FREE_PARKED flag
* is specified, in which case it may also be in the 'parked' state.
*/
void qman_destroy_fq(struct qman_fq *fq, u32 flags);
/**
* qman_fq_fqid - Queries the frame queue ID of a FQ object
* @fq: the frame queue object to query
*/
__rte_internal
u32 qman_fq_fqid(struct qman_fq *fq);
/**
* qman_fq_state - Queries the state of a FQ object
* @fq: the frame queue object to query
* @state: pointer to state enum to return the FQ scheduling state
* @flags: pointer to state flags to receive QMAN_FQ_STATE_*** bitmask
*
* Queries the state of the FQ object, without performing any h/w commands.
* This captures the state, as seen by the driver, at the time the function
* executes.
*/
__rte_internal
void qman_fq_state(struct qman_fq *fq, enum qman_fq_state *state, u32 *flags);
/**
* qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled"
* @fq: the frame queue object to modify, must be 'parked' or new.
* @flags: bit-mask of QMAN_INITFQ_FLAG_*** options
* @opts: the FQ-modification settings, as defined in the low-level API
*
* The @opts parameter comes from the low-level portal API. Select
* QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled
* rather than parked. NB, @opts can be NULL.
*
* Note that some fields and options within @opts may be ignored or overwritten
* by the driver;
* 1. the 'count' and 'fqid' fields are always ignored (this operation only
* affects one frame queue: @fq).
* 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated
* 'fqd' structure's 'context_b' field are sometimes overwritten;
* - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is
* initialised to a value used by the driver for demux.
* - if context_b is initialised for demux, so is context_a in case stashing
* is requested (see item 4).
* (So caller control of context_b is only possible for TO_DCPORTAL frame queue
* objects.)
* 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's
* 'dest::channel' field will be overwritten to match the portal used to issue
* the command. If the WE_DESTWQ write-enable bit had already been set by the
* caller, the channel workqueue will be left as-is, otherwise the write-enable
* bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag
* isn't set, the destination channel/workqueue fields and the write-enable bit
* are left as-is.
* 4. if the driver overwrites context_a/b for demux, then if
* QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite
* context_a.address fields and will leave the stashing fields provided by the
* user alone, otherwise it will zero out the context_a.stashing fields.
*/
__rte_internal
int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts);
/**
* qman_schedule_fq - Schedules a FQ
* @fq: the frame queue object to schedule, must be 'parked'
*
* Schedules the frame queue, which must be Parked, which takes it to
* Tentatively-Scheduled or Truly-Scheduled depending on its fill-level.
*/
int qman_schedule_fq(struct qman_fq *fq);
/**
* qman_retire_fq - Retires a FQ
* @fq: the frame queue object to retire
* @flags: FQ flags (as per qman_fq_state) if retirement completes immediately
*
* Retires the frame queue. This returns zero if it succeeds immediately, +1 if
* the retirement was started asynchronously, otherwise it returns negative for
* failure. When this function returns zero, @flags is set to indicate whether
* the retired FQ is empty and/or whether it has any ORL fragments (to show up
* as ERNs). Otherwise the corresponding flags will be known when a subsequent
* FQRN message shows up on the portal's message ring.
*
* NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or
* Active state), the completion will be via the message ring as a FQRN - but
* the corresponding callback may occur before this function returns!! Ie. the
* caller should be prepared to accept the callback as the function is called,
* not only once it has returned.
*/
__rte_internal
int qman_retire_fq(struct qman_fq *fq, u32 *flags);
/**
* qman_oos_fq - Puts a FQ "out of service"
* @fq: the frame queue object to be put out-of-service, must be 'retired'
*
* The frame queue must be retired and empty, and if any order restoration list
* was released as ERNs at the time of retirement, they must all be consumed.
*/
__rte_internal
int qman_oos_fq(struct qman_fq *fq);
/**
* qman_fq_flow_control - Set the XON/XOFF state of a FQ
* @fq: the frame queue object to be set to XON/XOFF state, must not be 'oos',
* or 'retired' or 'parked' state
* @xon: boolean to set fq in XON or XOFF state
*
* The frame should be in Tentatively Scheduled state or Truly Schedule sate,
* otherwise the IFSI interrupt will be asserted.
*/
int qman_fq_flow_control(struct qman_fq *fq, int xon);
/**
* qman_query_fq - Queries FQD fields (via h/w query command)
* @fq: the frame queue object to be queried
* @fqd: storage for the queried FQD fields
*/
int qman_query_fq(struct qman_fq *fq, struct qm_fqd *fqd);
/**
* qman_query_fq_has_pkts - Queries non-programmable FQD fields and returns '1'
* if packets are in the frame queue. If there are no packets on frame
* queue '0' is returned.
* @fq: the frame queue object to be queried
*/
int qman_query_fq_has_pkts(struct qman_fq *fq);
/**
* qman_query_fq_np - Queries non-programmable FQD fields
* @fq: the frame queue object to be queried
* @np: storage for the queried FQD fields
*/
__rte_internal
int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np);
/**
* qman_query_fq_frmcnt - Queries fq frame count
* @fq: the frame queue object to be queried
* @frm_cnt: number of frames in the queue
*/
__rte_internal
int qman_query_fq_frm_cnt(struct qman_fq *fq, u32 *frm_cnt);
/**
* qman_query_wq - Queries work queue lengths
* @query_dedicated: If non-zero, query length of WQs in the channel dedicated
* to this software portal. Otherwise, query length of WQs in a
* channel specified in wq.
* @wq: storage for the queried WQs lengths. Also specified the channel to
* to query if query_dedicated is zero.
*/
int qman_query_wq(u8 query_dedicated, struct qm_mcr_querywq *wq);
/**
* qman_volatile_dequeue - Issue a volatile dequeue command
* @fq: the frame queue object to dequeue from
* @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options
* @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set()
*
* Attempts to lock access to the portal's VDQCR volatile dequeue functionality.
* The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and
* the VDQCR is already in use, otherwise returns non-zero for failure. If
* QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once
* the VDQCR command has finished executing (ie. once the callback for the last
* DQRR entry resulting from the VDQCR command has been called). If not using
* the FINISH flag, completion can be determined either by detecting the
* presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits
* in the "stat" field of the "struct qm_dqrr_entry" passed to the FQ's dequeue
* callback, or by waiting for the QMAN_FQ_STATE_VDQCR bit to disappear from the
* "flags" retrieved from qman_fq_state().
*/
__rte_internal
int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr);
/**
* qman_enqueue - Enqueue a frame to a frame queue
* @fq: the frame queue object to enqueue to
* @fd: a descriptor of the frame to be enqueued
* @flags: bit-mask of QMAN_ENQUEUE_FLAG_*** options
*
* Fills an entry in the EQCR of portal @qm to enqueue the frame described by
* @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid'
* field is ignored. The return value is non-zero on error, such as ring full
* (and FLAG_WAIT not specified), congestion avoidance (FLAG_WATCH_CGR
* specified), etc. If the ring is full and FLAG_WAIT is specified, this
* function will block. If FLAG_INTERRUPT is set, the EQCI bit of the portal
* interrupt will assert when Qman consumes the EQCR entry (subject to "status
* disable", "enable", and "inhibit" registers). If FLAG_DCA is set, Qman will
* perform an implied "discrete consumption acknowledgment" on the dequeue
* ring's (DQRR) entry, at the ring index specified by the FLAG_DCA_IDX(x)
* macro. (As an alternative to issuing explicit DCA actions on DQRR entries,
* this implicit DCA can delay the release of a "held active" frame queue
* corresponding to a DQRR entry until Qman consumes the EQCR entry - providing
* order-preservation semantics in packet-forwarding scenarios.) If FLAG_DCA is
* set, then FLAG_DCA_PARK can also be set to imply that the DQRR consumption
* acknowledgment should "park request" the "held active" frame queue. Ie.
* when the portal eventually releases that frame queue, it will be left in the
* Parked state rather than Tentatively Scheduled or Truly Scheduled. If the
* portal is watching congestion groups, the QMAN_ENQUEUE_FLAG_WATCH_CGR flag
* is requested, and the FQ is a member of a congestion group, then this
* function returns -EAGAIN if the congestion group is currently congested.
* Note, this does not eliminate ERNs, as the async interface means we can be
* sending enqueue commands to an un-congested FQ that becomes congested before
* the enqueue commands are processed, but it does minimise needless thrashing
* of an already busy hardware resource by throttling many of the to-be-dropped
* enqueues "at the source".
*/
__rte_internal
int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd, u32 flags);
__rte_internal
int qman_enqueue_multi(struct qman_fq *fq, const struct qm_fd *fd, u32 *flags,
int frames_to_send);
/**
* qman_ern_poll_free - Polling on MR and calling a callback function to free
* mbufs when SW ERNs received.
*/
__rte_internal
void qman_ern_poll_free(void);
/**
* qman_ern_register_cb - Register a callback function to free buffers.
*/
__rte_internal
void qman_ern_register_cb(qman_cb_free_mbuf cb);
/**
* qman_enqueue_multi_fq - Enqueue multiple frames to their respective frame
* queues.
* @fq[]: Array of frame queue objects to enqueue to
* @fd: pointer to first descriptor of frame to be enqueued
* @frames_to_send: number of frames to be sent.
*
* This API is similar to qman_enqueue_multi(), but it takes fd which needs
* to be processed by different frame queues.
*/
__rte_internal
int
qman_enqueue_multi_fq(struct qman_fq *fq[], const struct qm_fd *fd,
u32 *flags, int frames_to_send);
typedef int (*qman_cb_precommit) (void *arg);
/**
* qman_enqueue_orp - Enqueue a frame to a frame queue using an ORP
* @fq: the frame queue object to enqueue to
* @fd: a descriptor of the frame to be enqueued
* @flags: bit-mask of QMAN_ENQUEUE_FLAG_*** options
* @orp: the frame queue object used as an order restoration point.
* @orp_seqnum: the sequence number of this frame in the order restoration path
*
* Similar to qman_enqueue(), but with the addition of an Order Restoration
* Point (@orp) and corresponding sequence number (@orp_seqnum) for this
* enqueue operation to employ order restoration. Each frame queue object acts
* as an Order Definition Point (ODP) by providing each frame dequeued from it
* with an incrementing sequence number, this value is generally ignored unless
* that sequence of dequeued frames will need order restoration later. Each
* frame queue object also encapsulates an Order Restoration Point (ORP), which
* is a re-assembly context for re-ordering frames relative to their sequence
* numbers as they are enqueued. The ORP does not have to be within the frame
* queue that receives the enqueued frame, in fact it is usually the frame
* queue from which the frames were originally dequeued. For the purposes of
* order restoration, multiple frames (or "fragments") can be enqueued for a
* single sequence number by setting the QMAN_ENQUEUE_FLAG_NLIS flag for all
* enqueues except the final fragment of a given sequence number. Ordering
* between sequence numbers is guaranteed, even if fragments of different
* sequence numbers are interlaced with one another. Fragments of the same
* sequence number will retain the order in which they are enqueued. If no
* enqueue is to performed, QMAN_ENQUEUE_FLAG_HOLE indicates that the given
* sequence number is to be "skipped" by the ORP logic (eg. if a frame has been
* dropped from a sequence), or QMAN_ENQUEUE_FLAG_NESN indicates that the given
* sequence number should become the ORP's "Next Expected Sequence Number".
*
* Side note: a frame queue object can be used purely as an ORP, without
* carrying any frames at all. Care should be taken not to deallocate a frame
* queue object that is being actively used as an ORP, as a future allocation
* of the frame queue object may start using the internal ORP before the
* previous use has finished.
*/
int qman_enqueue_orp(struct qman_fq *fq, const struct qm_fd *fd, u32 flags,
struct qman_fq *orp, u16 orp_seqnum);
/**
* qman_alloc_fqid_range - Allocate a contiguous range of FQIDs
* @result: is set by the API to the base FQID of the allocated range
* @count: the number of FQIDs required
* @align: required alignment of the allocated range
* @partial: non-zero if the API can return fewer than @count FQIDs
*
* Returns the number of frame queues allocated, or a negative error code. If
* @partial is non zero, the allocation request may return a smaller range of
* FQs than requested (though alignment will be as requested). If @partial is
* zero, the return value will either be 'count' or negative.
*/
__rte_internal
int qman_alloc_fqid_range(u32 *result, u32 count, u32 align, int partial);
static inline int qman_alloc_fqid(u32 *result)
{
int ret = qman_alloc_fqid_range(result, 1, 0, 0);
return (ret > 0) ? 0 : ret;
}
/**
* qman_release_fqid_range - Release the specified range of frame queue IDs
* @fqid: the base FQID of the range to deallocate
* @count: the number of FQIDs in the range
*
* This function can also be used to seed the allocator with ranges of FQIDs
* that it can subsequently allocate from.
*/
void qman_release_fqid_range(u32 fqid, unsigned int count);
static inline void qman_release_fqid(u32 fqid)
{
qman_release_fqid_range(fqid, 1);
}
void qman_seed_fqid_range(u32 fqid, unsigned int count);
int qman_shutdown_fq(u32 fqid);
/**
* qman_reserve_fqid_range - Reserve the specified range of frame queue IDs
* @fqid: the base FQID of the range to deallocate
* @count: the number of FQIDs in the range
*/
__rte_internal
int qman_reserve_fqid_range(u32 fqid, unsigned int count);
static inline int qman_reserve_fqid(u32 fqid)
{
return qman_reserve_fqid_range(fqid, 1);
}
/* Pool-channel management */
/**
* qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs
* @result: is set by the API to the base pool-channel ID of the allocated range
* @count: the number of pool-channel IDs required
* @align: required alignment of the allocated range
* @partial: non-zero if the API can return fewer than @count
*
* Returns the number of pool-channel IDs allocated, or a negative error code.
* If @partial is non zero, the allocation request may return a smaller range of
* than requested (though alignment will be as requested). If @partial is zero,
* the return value will either be 'count' or negative.
*/
__rte_internal
int qman_alloc_pool_range(u32 *result, u32 count, u32 align, int partial);
static inline int qman_alloc_pool(u32 *result)
{
int ret = qman_alloc_pool_range(result, 1, 0, 0);
return (ret > 0) ? 0 : ret;
}
/**
* qman_release_pool_range - Release the specified range of pool-channel IDs
* @id: the base pool-channel ID of the range to deallocate
* @count: the number of pool-channel IDs in the range
*/
void qman_release_pool_range(u32 id, unsigned int count);
static inline void qman_release_pool(u32 id)
{
qman_release_pool_range(id, 1);
}
/**
* qman_reserve_pool_range - Reserve the specified range of pool-channel IDs
* @id: the base pool-channel ID of the range to reserve
* @count: the number of pool-channel IDs in the range
*/
int qman_reserve_pool_range(u32 id, unsigned int count);
static inline int qman_reserve_pool(u32 id)
{
return qman_reserve_pool_range(id, 1);
}
void qman_seed_pool_range(u32 id, unsigned int count);
/* CGR management */
/* -------------- */
/**
* qman_create_cgr - Register a congestion group object
* @cgr: the 'cgr' object, with fields filled in
* @flags: QMAN_CGR_FLAG_* values
* @opts: optional state of CGR settings
*
* Registers this object to receiving congestion entry/exit callbacks on the
* portal affine to the cpu portal on which this API is executed. If opts is
* NULL then only the callback (cgr->cb) function is registered. If @flags
* contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset
* any unspecified parameters) will be used rather than a modify hw hardware
* (which only modifies the specified parameters).
*/
__rte_internal
int qman_create_cgr(struct qman_cgr *cgr, u32 flags,
struct qm_mcc_initcgr *opts);
/**
* qman_create_cgr_to_dcp - Register a congestion group object to DCP portal
* @cgr: the 'cgr' object, with fields filled in
* @flags: QMAN_CGR_FLAG_* values
* @dcp_portal: the DCP portal to which the cgr object is registered.
* @opts: optional state of CGR settings
*
*/
int qman_create_cgr_to_dcp(struct qman_cgr *cgr, u32 flags, u16 dcp_portal,
struct qm_mcc_initcgr *opts);
/**
* qman_delete_cgr - Deregisters a congestion group object
* @cgr: the 'cgr' object to deregister
*
* "Unplugs" this CGR object from the portal affine to the cpu on which this API
* is executed. This must be excuted on the same affine portal on which it was
* created.
*/
__rte_internal
int qman_delete_cgr(struct qman_cgr *cgr);
/**
* qman_modify_cgr - Modify CGR fields
* @cgr: the 'cgr' object to modify
* @flags: QMAN_CGR_FLAG_* values
* @opts: the CGR-modification settings
*
* The @opts parameter comes from the low-level portal API, and can be NULL.
* Note that some fields and options within @opts may be ignored or overwritten
* by the driver, in particular the 'cgrid' field is ignored (this operation
* only affects the given CGR object). If @flags contains
* QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset any
* unspecified parameters) will be used rather than a modify hw hardware (which
* only modifies the specified parameters).
*/
__rte_internal
int qman_modify_cgr(struct qman_cgr *cgr, u32 flags,
struct qm_mcc_initcgr *opts);
/**
* qman_query_cgr - Queries CGR fields
* @cgr: the 'cgr' object to query
* @result: storage for the queried congestion group record
*/
int qman_query_cgr(struct qman_cgr *cgr, struct qm_mcr_querycgr *result);
/**
* qman_query_congestion - Queries the state of all congestion groups
* @congestion: storage for the queried state of all congestion groups
*/
int qman_query_congestion(struct qm_mcr_querycongestion *congestion);
/**
* qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs
* @result: is set by the API to the base CGR ID of the allocated range
* @count: the number of CGR IDs required
* @align: required alignment of the allocated range
* @partial: non-zero if the API can return fewer than @count
*
* Returns the number of CGR IDs allocated, or a negative error code.
* If @partial is non zero, the allocation request may return a smaller range of
* than requested (though alignment will be as requested). If @partial is zero,
* the return value will either be 'count' or negative.
*/
__rte_internal
int qman_alloc_cgrid_range(u32 *result, u32 count, u32 align, int partial);
static inline int qman_alloc_cgrid(u32 *result)
{
int ret = qman_alloc_cgrid_range(result, 1, 0, 0);
return (ret > 0) ? 0 : ret;
}
/**
* qman_release_cgrid_range - Release the specified range of CGR IDs
* @id: the base CGR ID of the range to deallocate
* @count: the number of CGR IDs in the range
*/
__rte_internal
void qman_release_cgrid_range(u32 id, unsigned int count);
static inline void qman_release_cgrid(u32 id)
{
qman_release_cgrid_range(id, 1);
}
/**
* qman_reserve_cgrid_range - Reserve the specified range of CGR ID
* @id: the base CGR ID of the range to reserve
* @count: the number of CGR IDs in the range
*/
int qman_reserve_cgrid_range(u32 id, unsigned int count);
static inline int qman_reserve_cgrid(u32 id)
{
return qman_reserve_cgrid_range(id, 1);
}
void qman_seed_cgrid_range(u32 id, unsigned int count);
/* Helpers */
/* ------- */
/**
* qman_poll_fq_for_init - Check if an FQ has been initialised from OOS
* @fqid: the FQID that will be initialised by other s/w
*
* In many situations, a FQID is provided for communication between s/w
* entities, and whilst the consumer is responsible for initialising and
* scheduling the FQ, the producer(s) generally create a wrapper FQ object using
* and only call qman_enqueue() (no FQ initialisation, scheduling, etc). Ie;
* qman_create_fq(..., QMAN_FQ_FLAG_NO_MODIFY, ...);
* However, data can not be enqueued to the FQ until it is initialised out of
* the OOS state - this function polls for that condition. It is particularly
* useful for users of IPC functions - each endpoint's Rx FQ is the other
* endpoint's Tx FQ, so each side can initialise and schedule their Rx FQ object
* and then use this API on the (NO_MODIFY) Tx FQ object in order to
* synchronise. The function returns zero for success, +1 if the FQ is still in
* the OOS state, or negative if there was an error.
*/
static inline int qman_poll_fq_for_init(struct qman_fq *fq)
{
struct qm_mcr_queryfq_np np;
int err;
err = qman_query_fq_np(fq, &np);
if (err)
return err;
if ((np.state & QM_MCR_NP_STATE_MASK) == QM_MCR_NP_STATE_OOS)
return 1;
return 0;
}
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
#define cpu_to_hw_sg(x)
#define hw_sg_to_cpu(x)
#else
#define cpu_to_hw_sg(x) __cpu_to_hw_sg(x)
#define hw_sg_to_cpu(x) __hw_sg_to_cpu(x)
static inline void __cpu_to_hw_sg(struct qm_sg_entry *sgentry)
{
sgentry->opaque = cpu_to_be64(sgentry->opaque);
sgentry->val = cpu_to_be32(sgentry->val);
sgentry->val_off = cpu_to_be16(sgentry->val_off);
}
static inline void __hw_sg_to_cpu(struct qm_sg_entry *sgentry)
{
sgentry->opaque = be64_to_cpu(sgentry->opaque);
sgentry->val = be32_to_cpu(sgentry->val);
sgentry->val_off = be16_to_cpu(sgentry->val_off);
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* __FSL_QMAN_H */