/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2016 Intel Corporation
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <sys/queue.h>
#include <netinet/in.h>
#include <setjmp.h>
#include <stdarg.h>
#include <ctype.h>
#include <errno.h>
#include <getopt.h>

#include <rte_common.h>
#include <rte_log.h>
#include <rte_malloc.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>

#define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1

#define NB_MBUF   8192

#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */

/*
 * Configurable number of RX/TX ring descriptors
 */
#define RTE_TEST_RX_DESC_DEFAULT 1024
#define RTE_TEST_TX_DESC_DEFAULT 1024
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;

/* ethernet addresses of ports */
static struct rte_ether_addr lsi_ports_eth_addr[RTE_MAX_ETHPORTS];

/* mask of enabled ports */
static uint32_t lsi_enabled_port_mask = 0;

static unsigned int lsi_rx_queue_per_lcore = 1;

/* destination port for L2 forwarding */
static unsigned lsi_dst_ports[RTE_MAX_ETHPORTS] = {0};

#define MAX_PKT_BURST 32

#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
struct lcore_queue_conf {
	unsigned n_rx_port;
	unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
	unsigned tx_queue_id;
} __rte_cache_aligned;
struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];

struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];

static struct rte_eth_conf port_conf = {
	.rxmode = {
		.split_hdr_size = 0,
	},
	.txmode = {
		.mq_mode = ETH_MQ_TX_NONE,
	},
	.intr_conf = {
		.lsc = 1, /**< lsc interrupt feature enabled */
	},
};

struct rte_mempool * lsi_pktmbuf_pool = NULL;

/* Per-port statistics struct */
struct lsi_port_statistics {
	uint64_t tx;
	uint64_t rx;
	uint64_t dropped;
} __rte_cache_aligned;
struct lsi_port_statistics port_statistics[RTE_MAX_ETHPORTS];

/* A tsc-based timer responsible for triggering statistics printout */
#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
#define MAX_TIMER_PERIOD 86400 /* 1 day max */
static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000; /* default period is 10 seconds */

/* Print out statistics on packets dropped */
static void
print_stats(void)
{
	struct rte_eth_link link;
	uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
	uint16_t portid;

	total_packets_dropped = 0;
	total_packets_tx = 0;
	total_packets_rx = 0;

	const char clr[] = { 27, '[', '2', 'J', '\0' };
	const char topLeft[] = { 27, '[', '1', ';', '1', 'H','\0' };
	int link_get_err;

		/* Clear screen and move to top left */
	printf("%s%s", clr, topLeft);

	printf("\nPort statistics ====================================");

	for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
		/* skip ports that are not enabled */
		if ((lsi_enabled_port_mask & (1 << portid)) == 0)
			continue;

		memset(&link, 0, sizeof(link));
		link_get_err = rte_eth_link_get_nowait(portid, &link);
		printf("\nStatistics for port %u ------------------------------"
			   "\nLink status: %25s"
			   "\nLink speed: %26u"
			   "\nLink duplex: %25s"
			   "\nPackets sent: %24"PRIu64
			   "\nPackets received: %20"PRIu64
			   "\nPackets dropped: %21"PRIu64,
			   portid,
			   link_get_err < 0 ? "Link get failed" :
			   (link.link_status ? "Link up" : "Link down"),
			   link_get_err < 0 ? 0 :
					(unsigned int)link.link_speed,
			   link_get_err < 0 ? "Link get failed" :
			   (link.link_duplex == ETH_LINK_FULL_DUPLEX ? \
					"full-duplex" : "half-duplex"),
			   port_statistics[portid].tx,
			   port_statistics[portid].rx,
			   port_statistics[portid].dropped);

		total_packets_dropped += port_statistics[portid].dropped;
		total_packets_tx += port_statistics[portid].tx;
		total_packets_rx += port_statistics[portid].rx;
	}
	printf("\nAggregate statistics ==============================="
		   "\nTotal packets sent: %18"PRIu64
		   "\nTotal packets received: %14"PRIu64
		   "\nTotal packets dropped: %15"PRIu64,
		   total_packets_tx,
		   total_packets_rx,
		   total_packets_dropped);
	printf("\n====================================================\n");
}

static void
lsi_simple_forward(struct rte_mbuf *m, unsigned portid)
{
	struct rte_ether_hdr *eth;
	void *tmp;
	unsigned dst_port = lsi_dst_ports[portid];
	int sent;
	struct rte_eth_dev_tx_buffer *buffer;

	eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);

	/* 02:00:00:00:00:xx */
	tmp = &eth->d_addr.addr_bytes[0];
	*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);

	/* src addr */
	rte_ether_addr_copy(&lsi_ports_eth_addr[dst_port], &eth->s_addr);

	buffer = tx_buffer[dst_port];
	sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
	if (sent)
		port_statistics[dst_port].tx += sent;
}

/* main processing loop */
static void
lsi_main_loop(void)
{
	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
	struct rte_mbuf *m;
	unsigned lcore_id;
	unsigned sent;
	uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
	unsigned i, j, portid, nb_rx;
	struct lcore_queue_conf *qconf;
	const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S *
			BURST_TX_DRAIN_US;
	struct rte_eth_dev_tx_buffer *buffer;

	prev_tsc = 0;
	timer_tsc = 0;

	lcore_id = rte_lcore_id();
	qconf = &lcore_queue_conf[lcore_id];

	if (qconf->n_rx_port == 0) {
		RTE_LOG(INFO, LSI, "lcore %u has nothing to do\n", lcore_id);
		return;
	}

	RTE_LOG(INFO, LSI, "entering main loop on lcore %u\n", lcore_id);

	for (i = 0; i < qconf->n_rx_port; i++) {

		portid = qconf->rx_port_list[i];
		RTE_LOG(INFO, LSI, " -- lcoreid=%u portid=%u\n", lcore_id,
			portid);
	}

	while (1) {

		cur_tsc = rte_rdtsc();

		/*
		 * TX burst queue drain
		 */
		diff_tsc = cur_tsc - prev_tsc;
		if (unlikely(diff_tsc > drain_tsc)) {

			for (i = 0; i < qconf->n_rx_port; i++) {

				portid = lsi_dst_ports[qconf->rx_port_list[i]];
				buffer = tx_buffer[portid];

				sent = rte_eth_tx_buffer_flush(portid, 0, buffer);
				if (sent)
					port_statistics[portid].tx += sent;

			}

			/* if timer is enabled */
			if (timer_period > 0) {

				/* advance the timer */
				timer_tsc += diff_tsc;

				/* if timer has reached its timeout */
				if (unlikely(timer_tsc >= (uint64_t) timer_period)) {

					/* do this only on master core */
					if (lcore_id == rte_get_master_lcore()) {
						print_stats();
						/* reset the timer */
						timer_tsc = 0;
					}
				}
			}

			prev_tsc = cur_tsc;
		}

		/*
		 * Read packet from RX queues
		 */
		for (i = 0; i < qconf->n_rx_port; i++) {

			portid = qconf->rx_port_list[i];
			nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
						 pkts_burst, MAX_PKT_BURST);

			port_statistics[portid].rx += nb_rx;

			for (j = 0; j < nb_rx; j++) {
				m = pkts_burst[j];
				rte_prefetch0(rte_pktmbuf_mtod(m, void *));
				lsi_simple_forward(m, portid);
			}
		}
	}
}

static int
lsi_launch_one_lcore(__attribute__((unused)) void *dummy)
{
	lsi_main_loop();
	return 0;
}

/* display usage */
static void
lsi_usage(const char *prgname)
{
	printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
		"  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
		"  -q NQ: number of queue (=ports) per lcore (default is 1)\n"
		"  -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
			prgname);
}

static int
lsi_parse_portmask(const char *portmask)
{
	char *end = NULL;
	unsigned long pm;

	/* parse hexadecimal string */
	pm = strtoul(portmask, &end, 16);
	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
		return -1;

	if (pm == 0)
		return -1;

	return pm;
}

static unsigned int
lsi_parse_nqueue(const char *q_arg)
{
	char *end = NULL;
	unsigned long n;

	/* parse hexadecimal string */
	n = strtoul(q_arg, &end, 10);
	if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
		return 0;
	if (n == 0)
		return 0;
	if (n >= MAX_RX_QUEUE_PER_LCORE)
		return 0;

	return n;
}

static int
lsi_parse_timer_period(const char *q_arg)
{
	char *end = NULL;
	int n;

	/* parse number string */
	n = strtol(q_arg, &end, 10);
	if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
		return -1;
	if (n >= MAX_TIMER_PERIOD)
		return -1;

	return n;
}

/* Parse the argument given in the command line of the application */
static int
lsi_parse_args(int argc, char **argv)
{
	int opt, ret;
	char **argvopt;
	int option_index;
	char *prgname = argv[0];
	static struct option lgopts[] = {
		{NULL, 0, 0, 0}
	};

	argvopt = argv;

	while ((opt = getopt_long(argc, argvopt, "p:q:T:",
				  lgopts, &option_index)) != EOF) {

		switch (opt) {
		/* portmask */
		case 'p':
			lsi_enabled_port_mask = lsi_parse_portmask(optarg);
			if (lsi_enabled_port_mask == 0) {
				printf("invalid portmask\n");
				lsi_usage(prgname);
				return -1;
			}
			break;

		/* nqueue */
		case 'q':
			lsi_rx_queue_per_lcore = lsi_parse_nqueue(optarg);
			if (lsi_rx_queue_per_lcore == 0) {
				printf("invalid queue number\n");
				lsi_usage(prgname);
				return -1;
			}
			break;

		/* timer period */
		case 'T':
			timer_period = lsi_parse_timer_period(optarg) * 1000 * TIMER_MILLISECOND;
			if (timer_period < 0) {
				printf("invalid timer period\n");
				lsi_usage(prgname);
				return -1;
			}
			break;

		/* long options */
		case 0:
			lsi_usage(prgname);
			return -1;

		default:
			lsi_usage(prgname);
			return -1;
		}
	}

	if (optind >= 0)
		argv[optind-1] = prgname;

	ret = optind-1;
	optind = 1; /* reset getopt lib */
	return ret;
}

/**
 * It will be called as the callback for specified port after a LSI interrupt
 * has been fully handled. This callback needs to be implemented carefully as
 * it will be called in the interrupt host thread which is different from the
 * application main thread.
 *
 * @param port_id
 *  Port id.
 * @param type
 *  event type.
 * @param param
 *  Pointer to(address of) the parameters.
 *
 * @return
 *  int.
 */
static int
lsi_event_callback(uint16_t port_id, enum rte_eth_event_type type, void *param,
		    void *ret_param)
{
	struct rte_eth_link link;
	int ret;

	RTE_SET_USED(param);
	RTE_SET_USED(ret_param);

	printf("\n\nIn registered callback...\n");
	printf("Event type: %s\n", type == RTE_ETH_EVENT_INTR_LSC ? "LSC interrupt" : "unknown event");
	ret = rte_eth_link_get_nowait(port_id, &link);
	if (ret < 0) {
		printf("Failed link get on port %d: %s\n",
		       port_id, rte_strerror(-ret));
		return ret;
	}
	if (link.link_status) {
		printf("Port %d Link Up - speed %u Mbps - %s\n\n",
				port_id, (unsigned)link.link_speed,
			(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
				("full-duplex") : ("half-duplex"));
	} else
		printf("Port %d Link Down\n\n", port_id);

	return 0;
}

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
	uint8_t count, all_ports_up, print_flag = 0;
	uint16_t portid;
	struct rte_eth_link link;
	int ret;

	printf("\nChecking link status");
	fflush(stdout);
	for (count = 0; count <= MAX_CHECK_TIME; count++) {
		all_ports_up = 1;
		for (portid = 0; portid < port_num; portid++) {
			if ((port_mask & (1 << portid)) == 0)
				continue;
			memset(&link, 0, sizeof(link));
			ret = rte_eth_link_get_nowait(portid, &link);
			if (ret < 0) {
				all_ports_up = 0;
				if (print_flag == 1)
					printf("Port %u link get failed: %s\n",
						portid, rte_strerror(-ret));
				continue;
			}
			/* print link status if flag set */
			if (print_flag == 1) {
				if (link.link_status)
					printf(
					"Port%d Link Up. Speed %u Mbps - %s\n",
						portid, link.link_speed,
				(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
					("full-duplex") : ("half-duplex\n"));
				else
					printf("Port %d Link Down\n", portid);
				continue;
			}
			/* clear all_ports_up flag if any link down */
			if (link.link_status == ETH_LINK_DOWN) {
				all_ports_up = 0;
				break;
			}
		}
		/* after finally printing all link status, get out */
		if (print_flag == 1)
			break;

		if (all_ports_up == 0) {
			printf(".");
			fflush(stdout);
			rte_delay_ms(CHECK_INTERVAL);
		}

		/* set the print_flag if all ports up or timeout */
		if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
			print_flag = 1;
			printf("done\n");
		}
	}
}

int
main(int argc, char **argv)
{
	struct lcore_queue_conf *qconf;
	int ret;
	uint16_t nb_ports;
	uint16_t portid, portid_last = 0;
	unsigned lcore_id, rx_lcore_id;
	unsigned nb_ports_in_mask = 0;

	/* init EAL */
	ret = rte_eal_init(argc, argv);
	if (ret < 0)
		rte_exit(EXIT_FAILURE, "rte_eal_init failed");
	argc -= ret;
	argv += ret;

	/* parse application arguments (after the EAL ones) */
	ret = lsi_parse_args(argc, argv);
	if (ret < 0)
		rte_exit(EXIT_FAILURE, "Invalid arguments");

	/* create the mbuf pool */
	lsi_pktmbuf_pool =
		rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32, 0,
			RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
	if (lsi_pktmbuf_pool == NULL)
		rte_panic("Cannot init mbuf pool\n");

	nb_ports = rte_eth_dev_count_avail();
	if (nb_ports == 0)
		rte_panic("No Ethernet port - bye\n");

	/*
	 * Each logical core is assigned a dedicated TX queue on each port.
	 */
	for (portid = 0; portid < nb_ports; portid++) {
		/* skip ports that are not enabled */
		if ((lsi_enabled_port_mask & (1 << portid)) == 0)
			continue;

		/* save the destination port id */
		if (nb_ports_in_mask % 2) {
			lsi_dst_ports[portid] = portid_last;
			lsi_dst_ports[portid_last] = portid;
		}
		else
			portid_last = portid;

		nb_ports_in_mask++;
	}
	if (nb_ports_in_mask < 2 || nb_ports_in_mask % 2)
		rte_exit(EXIT_FAILURE, "Current enabled port number is %u, "
				"but it should be even and at least 2\n",
				nb_ports_in_mask);

	rx_lcore_id = 0;
	qconf = &lcore_queue_conf[rx_lcore_id];

	/* Initialize the port/queue configuration of each logical core */
	for (portid = 0; portid < nb_ports; portid++) {
		/* skip ports that are not enabled */
		if ((lsi_enabled_port_mask & (1 << portid)) == 0)
			continue;

		/* get the lcore_id for this port */
		while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
		       lcore_queue_conf[rx_lcore_id].n_rx_port ==
		       lsi_rx_queue_per_lcore) {

			rx_lcore_id++;
			if (rx_lcore_id >= RTE_MAX_LCORE)
				rte_exit(EXIT_FAILURE, "Not enough cores\n");
		}
		if (qconf != &lcore_queue_conf[rx_lcore_id])
			/* Assigned a new logical core in the loop above. */
			qconf = &lcore_queue_conf[rx_lcore_id];

		qconf->rx_port_list[qconf->n_rx_port] = portid;
		qconf->n_rx_port++;
		printf("Lcore %u: RX port %u\n",rx_lcore_id, (unsigned) portid);
	}

	/* Initialise each port */
	for (portid = 0; portid < nb_ports; portid++) {
		struct rte_eth_rxconf rxq_conf;
		struct rte_eth_txconf txq_conf;
		struct rte_eth_conf local_port_conf = port_conf;
		struct rte_eth_dev_info dev_info;

		/* skip ports that are not enabled */
		if ((lsi_enabled_port_mask & (1 << portid)) == 0) {
			printf("Skipping disabled port %u\n", (unsigned) portid);
			continue;
		}
		/* init port */
		printf("Initializing port %u... ", (unsigned) portid);
		fflush(stdout);

		ret = rte_eth_dev_info_get(portid, &dev_info);
		if (ret != 0)
			rte_exit(EXIT_FAILURE,
				"Error during getting device (port %u) info: %s\n",
				portid, strerror(-ret));

		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
			local_port_conf.txmode.offloads |=
				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
		ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
		if (ret < 0)
			rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
				  ret, (unsigned) portid);

		ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
						       &nb_txd);
		if (ret < 0)
			rte_exit(EXIT_FAILURE,
				 "rte_eth_dev_adjust_nb_rx_tx_desc: err=%d, port=%u\n",
				 ret, (unsigned) portid);

		/* register lsi interrupt callback, need to be after
		 * rte_eth_dev_configure(). if (intr_conf.lsc == 0), no
		 * lsc interrupt will be present, and below callback to
		 * be registered will never be called.
		 */
		rte_eth_dev_callback_register(portid,
			RTE_ETH_EVENT_INTR_LSC, lsi_event_callback, NULL);

		ret = rte_eth_macaddr_get(portid,
				    &lsi_ports_eth_addr[portid]);
		if (ret < 0)
			rte_exit(EXIT_FAILURE,
				 "rte_eth_macaddr_get: err=%d, port=%u\n",
				 ret, (unsigned int)portid);

		/* init one RX queue */
		fflush(stdout);
		rxq_conf = dev_info.default_rxconf;
		rxq_conf.offloads = local_port_conf.rxmode.offloads;
		ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
					     rte_eth_dev_socket_id(portid),
					     &rxq_conf,
					     lsi_pktmbuf_pool);
		if (ret < 0)
			rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d, port=%u\n",
				  ret, (unsigned) portid);

		/* init one TX queue logical core on each port */
		fflush(stdout);
		txq_conf = dev_info.default_txconf;
		txq_conf.offloads = local_port_conf.txmode.offloads;
		ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
				rte_eth_dev_socket_id(portid),
				&txq_conf);
		if (ret < 0)
			rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d,port=%u\n",
				  ret, (unsigned) portid);

		/* Initialize TX buffers */
		tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
				RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
				rte_eth_dev_socket_id(portid));
		if (tx_buffer[portid] == NULL)
			rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
					(unsigned) portid);

		rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);

		ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
				rte_eth_tx_buffer_count_callback,
				&port_statistics[portid].dropped);
		if (ret < 0)
			rte_exit(EXIT_FAILURE, "Cannot set error callback for "
					"tx buffer on port %u\n", (unsigned) portid);

		/* Start device */
		ret = rte_eth_dev_start(portid);
		if (ret < 0)
			rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%u\n",
				  ret, (unsigned) portid);
		printf("done:\n");

		ret = rte_eth_promiscuous_enable(portid);
		if (ret != 0)
			rte_exit(EXIT_FAILURE,
				"rte_eth_promiscuous_enable: err=%s, port=%u\n",
				rte_strerror(-ret), portid);

		printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
				(unsigned) portid,
				lsi_ports_eth_addr[portid].addr_bytes[0],
				lsi_ports_eth_addr[portid].addr_bytes[1],
				lsi_ports_eth_addr[portid].addr_bytes[2],
				lsi_ports_eth_addr[portid].addr_bytes[3],
				lsi_ports_eth_addr[portid].addr_bytes[4],
				lsi_ports_eth_addr[portid].addr_bytes[5]);

		/* initialize port stats */
		memset(&port_statistics, 0, sizeof(port_statistics));
	}

	check_all_ports_link_status(nb_ports, lsi_enabled_port_mask);

	/* launch per-lcore init on every lcore */
	rte_eal_mp_remote_launch(lsi_launch_one_lcore, NULL, CALL_MASTER);
	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
		if (rte_eal_wait_lcore(lcore_id) < 0)
			return -1;
	}

	return 0;
}