add `carrier=on` while insmod rte_kni.ko in doc.

README.md

@@ -61,7 +61,7 @@ Currently, besides authorized DNS server of DNSPod, there are various products i
     # offload NIC
     modprobe uio
     insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-    insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/rte_kni.ko
+    insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/rte_kni.ko carrier=on
     python dpdk-devbind.py --status
     ifconfig eth0 down
     python dpdk-devbind.py --bind=igb_uio eth0 # assuming that use 10GE NIC and eth0

config.ini

@@ -20,7 +20,7 @@ vlan_strip=1
 
 # sleep when no pkts incomming
 # unit: microseconds
-idle_sleep=100
+idle_sleep=0
 
 # enabled port list
 #
@@ -36,30 +36,49 @@ idle_sleep=100
 #    1-3,4,7   ports 1,2,3,4,7 are enabled
 port_list=0
 
+# Number of vdev.
+nb_vdev=0
+
 # Port config section
 # Correspond to dpdk.port_list's index: port0, port1...
 [port0]
-addr=172.16.0.12
+addr=192.168.1.2
-netmask=255.255.240.0
+netmask=255.255.225.0
-broadcast=172.16.15.255
+broadcast=192.168.1.255
-gateway=172.16.0.1
+gateway=192.168.1.1
 
 # lcore list used to handle this port
 # the format is same as port_list
 # lcore_list= 0
 
 # Packet capture path, this will hurt performance
-pcap=./a.pcap
+#pcap=./a.pcap
+
+# Vdev config section
+# orrespond to dpdk.nb_vdev's index: vdev0, vdev1...
+#    iface : Shouldn't set always.
+#    path : The vuser device path in container. Required.
+#    queues : The max queues of vuser. Optional, default 1, greater or equal to the number of processes.
+#    queue_size : Queue size.Optional, default 256.
+#    mac : The mac address of vuser. Optional, default random, if vhost use phy NIC, it should be set to the phy NIC's mac.
+#    cq : Optional, if queues = 1, default 0; if queues > 1 default 1.
+#[vdev0]
+##iface=/usr/local/var/run/openvswitch/vhost-user0
+#path=/var/run/openvswitch/vhost-user0
+#queues=1
+#queue_size=256
+#mac=00:00:00:00:00:01
+#cq=0
 
 # Kni config: if enabled and method=reject,
 # all packets that do not belong to the following tcp_port and udp_port
 # will transmit to kernel; if method=accept, all packets that belong to
 # the following tcp_port and udp_port will transmit to kernel.
-[kni]
+#[kni]
-enable=1
+#enable=1
-method=reject
+#method=reject
 # The format is same as port_list
-tcp_port=80,443
+#tcp_port=80,443
 #udp_port=53
 
 # FreeBSD network performance tuning configurations.

doc/F-Stack_Quick_Start_Guide.md

@@ -45,7 +45,7 @@ The mount point can be made permanent across reboots, by adding the following li
 
     modprobe uio
     insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-    insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/rte_kni.ko
+    insmod /data/f-stack/dpdk/x86_64-native-linuxapp-gcc/kmod/rte_kni.ko carrier=on
     python dpdk-devbind.py --status
     ifconfig eth0 down
     python dpdk-devbind.py --bind=igb_uio eth0 # assuming that use 10GE NIC and eth0

doc/Launch_F-Stack_on_AWS_EC2_in_one_minute.md

@@ -25,7 +25,7 @@
     modprobe uio
     modprobe hwmon
     insmod build/kmod/igb_uio.ko
-    insmod build/kmod/rte_kni.ko
+    insmod build/kmod/rte_kni.ko carrier=on
 
     # set ip address
     #redhat7.3