cmhi
/
f-stack
mirror of https://github.com/F-Stack/f-stack.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
f-stack/dpdk/doc/guides/nics/features/mlx5.ini

52 lines
1.2 KiB
INI
Raw Normal View History

DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
;
; Supported features of the 'mlx5' network poll mode driver.
;
; Refer to default.ini for the full list of available PMD features.
;
[Features]
Speed capabilities = Y
Link status = Y
Link status event = Y
Removal event = Y
Rx interrupt = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
Scattered Rx = Y
DPDK: upgrade to DPDK 19.11.2(LTS).
2020-06-18 16:55:50 +00:00
LRO = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
TSO = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
RSS hash = Y
RSS key update = Y
RSS reta update = Y
Reupgrade DPDK to 18.11.
2019-06-25 11:12:58 +00:00
Inner RSS = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
SR-IOV = Y
VLAN filter = Y
DPDK: update to 18.11.5.
2019-11-23 08:13:38 +00:00
Flow control = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
Flow API = Y
CRC offload = Y
VLAN offload = Y
L3 checksum offload = Y
L4 checksum offload = Y
DPDK: upgrade to 17.11.4 LTS.
2018-11-21 08:34:11 +00:00
Timestamp offload = Y
Reupgrade DPDK to 18.11.
2019-06-25 11:12:58 +00:00
Inner L3 checksum = Y
Inner L4 checksum = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
Packet type parsing = Y
Rx descriptor status = Y
Tx descriptor status = Y
Basic stats = Y
Extended stats = Y
Stats per queue = Y
DPDK: upgrade to DPDK 19.11.2(LTS).
2020-06-18 16:55:50 +00:00
FW version = Y
Module EEPROM dump = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
Multiprocess aware = Y
Other kdrv = Y
ARMv8 = Y
Power8 = Y
Reupgrade DPDK to 18.11.
2019-06-25 11:12:58 +00:00
x86-32 = Y
DPDK: upgrade to 17.11.2 LTS. Changes: 1. This version is downloaded from https://fast.dpdk.org/rel/dpdk-17.11.2.tar.xz. 2. Adapt the new interface `rte_ring_dequeue_burst`. 3. Change the type of `port_id` from uint8_t to uint16_t. 4. Just link libdpdk.a instead of the other libaries. 5. Install libnuma-dev first. 6. Update the documents.
2018-05-15 09:49:22 +00:00
x86-64 = Y
Usage doc = Y