Changes in this update:
Enhancements
Added local stop functionality. This allows a user to stop an active function, such as an alert or timer, by uttering "Alexa, stop" when an Alexa-enabled product is offline.
Alerts in the background now stream in 10 sec intervals, rather than continuously.
Added support for France to the sample app.
friendlyName can now be updated for BlueZ implementations of BlueZBluetoothDevice and BlueZHostController.
Bug Fixes
Fixed an issue where the Bluetooth agent didn't clear user data upon reset, including paired devices and the uuidMapping table.
Fixed MediaPlayer threading issues. Now each instance has it's own glib main loop thread, rather than utilizing the default main context worker thread.
Fixed segmentation fault issues that occurred when certain static initializers needed to be initialized in a certain order, but the order wasn't defined.
Known Issues
The ACL may encounter issues if audio attachments are received but not consumed.
SpeechSynthesizerState currently uses GAINING_FOCUS and LOSING_FOCUS as a workaround for handling intermediate state. These states may be removed in a future release.
The Alexa app doesn't always indicate when a device is successfully connected via Bluetooth.
Connecting a product to streaming media via Bluetooth will sometimes stop media playback within the source application. Resuming playback through the source application or toggling next/previous will correct playback.
When a source device is streaming silence via Bluetooth, the Alexa companion app indicates that audio content is streaming.
The Bluetooth agent assumes that the Bluetooth adapter is always connected to a power source. Disconnecting from a power source during operation is not yet supported.
On some products, interrupted Bluetooth playback may not resume if other content is locally streamed.
On Raspberry Pi, when streaming audio via Bluetooth, sometimes the audio stream stutters.
On Raspberry Pi, BlueALSA must be terminated each time the device boots. See Raspberry Pi Quick Start Guide for more information.
Changes in this update:
Enhancements
* Added the Bluetooth interface, which manages the Bluetooth connection between Alexa-enabled products and peer devices. This release supports A2DP-SINK and AVRCP profiles. Note: Bluetooth is optional and is currently limited to Raspberry Pi and Linux platforms.
* Added new Bluetooth dependencies for Linux and Raspberry Pi.
* Device Capability Framework (DCF) renamed to Capabilities.
* Updated the non-CBL client ID error message to be more specific.
* Updated the sample app to enter a limited interaction mode after an unrecoverable error.
Bug Fixes
* Issue 597 - Fixed a bug where the sample app did not respond to locale change settings.
* Fixed issue where GStreamer 1.14 MediaPlayerTest failed on Windows.
* Fixed an issue where a segmentation fault was triggered after unrecoverable error handling.
Known Issues
* The ACL may encounter issues if audio attachments are received but not consumed.
* SpeechSynthesizerState currently uses GAINING_FOCUS and LOSING_FOCUS as a workaround for handling intermediate state. These states may be removed in a future release.
* The Alexa app doesn't always indicate when a device is successfully connected via Bluetooth.
* Connecting a product to streaming media via Bluetooth will sometimes stop media playback within the source application. Resuming playback through the source application or toggling next/previous will correct playback.
* When streaming silence via Bluetooth, the Alexa companion app will sometimes indicate that media content is streaming.
* The Bluetooth agent assumes that the Bluetooth adapter is always connected to a power source. Disconnecting from a power source during operation is not yet supported.
* On some products, interrupted Bluetooth playback may not resume if other content is locally streamed.
* When streaming content via Bluetooth, under certain conditions playback will fail to resume and the sample app hangs on exit. This is due to a conflict between the GStreamer pipeline and the Bluetooth agent.
* On Raspberry Pi, when streaming audio via Bluetooth, sometimes the audio stream stutters.
* On Raspberry Pi, BlueALSA must be terminated each time the device boots. See Raspberry Pi Quick Start Guide for more information.
Changes in this update:
**Enhancements**
* `rapidJson` is now included with "make install".
* Updated the `TemplateRuntimeObserverInterface` to support clearing of `displayCards`.
* Added Windows SDK support, along with an installation script (MinGW-w64).
* Updated `ContextManager` to ignore context reported by a state provider.
* The `SharedDataStream` object is now associated by playlist, rather than by URL.
* Added the `RegistrationManager` component. Now, when a user logs out all persistent user-specific data is cleared from the SDK. The log out functionality can be exercised in the sample app with the new command: `k`.
**Bug Fixes**
* [Issue 400](https://github.com/alexa/avs-device-sdk/issues/400) Fixed a bug where the alert reminder did not iterate as intended after loss of network connection.
* [Issue 477](https://github.com/alexa/avs-device-sdk/issues/477) Fixed a bug in which Alexa's weather response was being truncated.
* Fixed an issue in which there were reports of instability related to the Sensory engine. To correct this, the `portAudio` [`suggestedLatency`](https://github.com/alexa/avs-device-sdk/blob/master/Integration/AlexaClientSDKConfig.json#L62) value can now be configured.
**Known Issues**
* The `ACL` may encounter issues if audio attachments are received but not consumed.
* `SpeechSynthesizerState` currently uses `GAINING_FOCUS` and `LOSING_FOCUS` as a workaround for handling intermediate state. These states may be removed in a future release.
* Music playback doesn't immediately stop when a user barges-in on iHeartRadio.
* The Windows sample app sometimes hangs on exit.
* GDP receives a `SIGPIPE` when troubleshooting the Windows sample app.
**Enhancements**
* ContextManager now passes the namespace/name of the desired state to StateProv
iderInterface::provideState(). This is helpful when a single StateProvider obje
ct provides multiple states, and needs to know which one ContextManager is askin
g for.
* The mime parser was hardened against duplicate boundaries.
* Added functionality to add and remove AudioPlayer observers to the DefaultClie
nt.
* Unit tests for Alerts were added.
* Added en-IN, en-CA and ja-JP to the SampleApp locale selection menu.
* Added default alert and timer audio data to the SDK SampleApp. There is no lo
nger a requirement to download these audio files and configure them in the json
configuration file.
* Added support in SDS Reader and AttachmentReader for seeking into the future.
This allows a reader to move to an index which has not yet arrived in the SDS a
nd poll/block until it arrives.
* Added support for blocking Writers in the SharedDataStream class.
* Changed the default status code sent by MessageRequestObserverInterface::onSen
dCompleted() to SERVER_OTHER_ERROR, and mapped HTTP code 500 to SERVER_INTERNAL_
ERROR_V2.
* Added support for parsing stream duration out of playlists.
* Added a configuration option ("sampleApp":"displayCardsSupported") that allows
the displaying of display cards to be enabled or disabled.
* Named Timers and Reminders have been updated to fall back to the on-device bac
kground audio sound when cloud urls cannot be accessed or rendered.
**Bug Fixes**
* Removed floating point dependencies from core SDK libraries.
* Fixed bug in SpeechSynthesizer where it's erroneously calling stop more than once.
* Fixed an issue in ContentFetcher where it could hang during destruction until an active GET request completed.
* Fixed a couple of parsing bugs in LibCurlHttpContentFetcher related to case-sensitivity and mime-type handling.
* Fixed a bug where MediaPlayerObserverInterface::onPlaybackResumed() wasn't being called after resuming from a pause with a pending play/resume.
* Fixed a bug in LibCurlContentFetcher where it could error out if data is written to the SDS faster than it is consumed.
* The GStreamer-based MediaPlayer reference implementation now uses the ACL HTTP configured client.
* An API change has been made to MediaPlayerInterface::setSource(). This method now takes in an optional offset as well to allow for immediately streaming to the offset if possible.
* Next and Previous buttons now work with Audible.
* Pandora resume stuttering is addressed.
* Pausing and resuming Amazon music no longer seeks back to the beginning of the song.
* libcurl CURLOPT_NOSIGNAL option is set to 1 (https://curl.haxx.se/libcurl/c/CURLOPT_NOSIGNAL.html) to avoid crashes observed in SampleApp.
* Fixed the timing of the PlaybackReportIntervalEvent and PlaybackReportDelayEvent as specified in the directives.
* Fixed potential deadlocks in MediaPlayer during shutdown related to queued callbacks.
* Fixed a crash in MediaPlayer that could occur if the network is disconnected during playback.
* Fixed a bug where music could keep playing while Alexa is speaking.
* Fixed a bug which was causing problems with pause/resume and next/previous with Amazon Music.
* Fixed a bug where music could briefly start playing between speaks.
* Fixed a bug where HLS playlists would stop streaming after the initial playlist had been played to completion.
* Fixed a bug where Audible playback could not advance to the next chapter.
* Fixed some occurrences of SDK entering the IDLE state during the transition between Listening and Speaking states.
* Fixed a bug where PlaybackFinished events were not reporting the correct offset.
* An API change has been made to MediaPlayerInterface::getOffset(). This method is now required to return the final offset when called after playback has stopped.
* Fixed a problem where AIP was erroneously resetting its state upon getting a cancelDirective() callback.
**Known Issues**
* Capability agent for Notifications is not included in this release.
* `ACL`'s asynchronous receipt of audio attachments may manage resources poorly in scenarios where attachments are received but not consumed.
* GUI cards don't show for Kindle.
* The new SpeechSynthesizerState state values GAINING_FOCUS and LOSING_FOCUS were added as part of a work-around. The will likely be removed in subsequent releases.
* With the gstreamer-based MediaPlayer, after muting and unmuting, the next item starts playing rather than continuing with the current item.
- Changes in this update:
- Better GStreamer error reporting. MediaPlayer used to only report `MEDIA_ERROR_UNKNOWN`, now reports more specific errors as defined in `ErrorType.h`.
- Codebase has been formatted for easier reading.
- `DirectiveRouter::removeDirectiveHandler()` signature changed and now returns a bool indicating if given handler should be successfully removed or not.
- Cleanup of raw and shared pointers in the creation of `Transport` objects.
- `HTTP2Stream`s now have IDs assigned as they are acquired as opposed to created, making associated logs easier to interpret.
- `AlertsCapabilityAgent` has been refactored.
- Alert management has been factored out into an `AlertScheduler` class.
- Creation of Reminder (implements Alert) class.
- Added new capability agent for `PlaybackController` with unit tests.
- Added Settings interface with unit tests.
- Return type of `getOffsetInMilliseconds()` changed from `int64_t` to `std::chronology::milliseconds`.
- Added `AudioPlayer` unit tests.
- Added teardown for all Integration tests except Alerts.
- Implemented PlaylistParser.
- Bug fixes:
- AIP getting stuck in `LISTENING` or `THINKING` and refusing user input on network outage.
- SampleApp crashing if running for 5 minutes after network disconnect.
- Issue where on repeated user barge-ins, `AudioPlayer` would not pause. Specifically, the third attempt to “Play iHeartRadio” would not result in currently-playing music pausing.
- Utterances being ignored after particularly long TTS.
- GStreamer errors cropping up on SampleApp exit as a result of accessing the pipeline before it’s been setup.
- Crashing when playing one URL after another.
- Buffer overrun in Alerts Renderer.
- [SampleApp crashing when issuing "Alexa skip" command with iHeartRadio.](https://github.com/alexa/avs-device-sdk/issues/153)
- [`HTTP2Transport` network thread triggering a join on itself.](https://github.com/alexa/avs-device-sdk/issues/127)
- [`HTTP2Stream` request handling truncating exception messages.](https://github.com/alexa/avs-device-sdk/issues/67)
- [`AudioPlayer` was attempting an incorrect state transition from `STOPPED` to `PLAYING` through a `playbackResumed`.](https://github.com/alexa/avs-device-sdk/issues/138)
Changes in this update
- Added a fix to the sample app so that the StateSynchronization event is the first that gets sent to AVS.
- Added a POST_CONNECTED enum to ConnectionStatusObserver.
- StateSychronizer now automatically sends a StateSynchronization event when it receives a notification that ACL is CONNECTED.
- Added make install for installing the AVS Device SDK.
- Added an optional make networkIntegration for integration tests for slow network (only on Linux platforms).
- Added shutdown management which fully cleans up SDK objects during teardown.
- Fixed an issue with AudioPlayer barge-in which was preventing subsequent audio from playing.
- Changed Mediaplayer buffering to reduce stuttering.
- Known Issues:
- Connection loss during listening keeps the app in that state even after connection is regained. Pressing ‘s’ unsticks the state.
- Play/Pause media restarts it from the beginning.
- SpeechSynthesizer shows wrong UX state during a burst of Speaks.
- Quitting the sample app while AudioPlayer is playing something causes a segmentation fault.
- AudioPlayer sending PlaybackPaused during flash briefing.
- Long Delay playing live stations on iHeartRadio.
- Teardown warnings at the end of integration tests.
Changes in this update
- Added a getConfiguration() method to DirectiveHandlerInterface to register Capability Agents with Directive Sequencer.
- Fix race condition with reading attachments before a writer exists.
- Use of new Logging abstraction layer in modules - ADSL,AFML,ContextManager,AuthDelegate,AIP,KWD,Mediaplayer.
- Added ACL stream processing with Pause and redrive.
- Removed the dependency of ACL Library on Authdelegate.
- Added and interface to allow ACL to Add/Remove ConnectionStatusObserverInterface.
- Fixed compile errors in KittAi, DirectiveHandler and compiler warnings in AIP test.
- Corrected formatting on the files.
- Fixes for the following Github issues
- https://github.com/alexa/alexa-client-sdk/issues/21
- https://github.com/alexa/alexa-client-sdk/issues/25
Changes in this update:
- Added the SpeechSynthesizer, an implementation of the SpeechRecognizer capability agent.
- Implemented a reference MediaPlayer based on [GStreamer](https://gstreamer.freedesktop.org/) for audio playback.
- Added the MediaPlayerInterface that allows you to implement your own media player.
- Updated ACL to support asynchronous receipt of audio attachments from AVS.
Bug Fixes:
-Some intermittent unit test failures were fixed.
Known Issues:
-ACL's asynchronous receipt of audio attachments may manage resources poorly in scenarios where attachments are
received but not consumed.
- When an AttachmentReader does not deliver data for prolonged periods MediaPlayer may not resume playing the
delayed audio.
psendil
Federico Rozenberg
Sanjay Devireddy
Ken Cecka
avramson
Mradula Nayak
Nikhila Krishnan
Scott Heath
Hao Hu
Sanjay Devireddy